Lock/Unlock Memory; Erase All Memory - Elation SHOW DESIGNER 1 User Manual

M E N U [ c o n t i n u e d ]

LOCK/UNLOCK MEMORY

This is one of the hidden menu items that can only be selected while holding the
"ADD" switch when cycling through the menu selections.
This feature allows you to lock the memory to prevent someone from changing or
erasing anything that has been recorded. The message "MEMORY LOCKED, CAN'T
RECORD" will appear if anyone presses the record switch. All other menu items that
are not hidden will also be locked out in order to protect the memory.
To lock or unlock the memory from this menu, use the + and - switches or the data
wheel to select the desired state, then press "ENTER".

ERASE ALL MEMORY

This is the other hidden menu item that can only be selected while holding the
"ADD switch when cycling through the menu selections.
This allows you to erase the entire memory of the Show Designer 1. This does not
erase the software that runs the system but erases all the scene, preset, chase and
show data as well as the system parameters such as fixture assignments. The
message; "ARE YOU SURE? HOLD "YES" 5 SEC" will appear in the display. Press and
hold "YES" until the system reboots or press "NO" to exit.
w w w . e l a t i o n l i g h t i n g . c o m
18
SHOW DESIGNER 1™ User Manual