Port Status Indicators And Terminator Switch; Port Indicators; Terminator Switch; Figure 34: Bnc Port Detail - Allied Telesis CentreCOM AT-3606F Installation Manual

AT-3608 Connectivity

Port Status Indicators and Terminator Switch

Port Indicators

Figure 34: BNC Port Detail

Terminator Switch

34
The port status indicators on AT-3600 Series hub front panels provide
visual diagnostic and activity information for network analysis. The
indicators are either an individual port LED or a central indicator for box
level monitoring.
Each 10BASE2 port supports the following indicator functions with two
single-color front panel LEDs per port, shown in Figure 34:
ON LINE (Steady Green)— Indicates that the port is not partitioned.
RECEIVE (Flashing Amber)— Indicates that the port is receiving
Ethernet packets.
Figure 34
also shows the location of the 50
BNC port receptacle:
OFF (disabled)—Use the OFF position if you are installing a coaxial cable
segment with a BNC-T connector on this port.
ON (enabled)—Use the ON position if you are installing a coaxial cable
segment without a BNC-T connector at this port and the unit is at the end
of the cable. This is the default switch position.
Terminator
1
switch
toggle
ON LINE
ON
OFF
TERMINATOR
RECEIVE
Terminator switch included at each
Port
activity
LEDs