Vcstack Stacking Module; Figure 26. At-Stackxg Stacking Module; Figure 27. At-X6Em/Xs2 Stacking Module - Allied Telesis 48Ts/X Installation Manual

Chapter 1: Overview

VCStack Stacking Module

52
A Virtual Chassis Stack (VCStack) is two or more separate Allied Telesis
switches that are configured to operate as a single logical switch. The
component switches are connected via VCStack stacking modules
installed in each switch.
Two VCStack stacking modules are available:
The AT-StackXG has two full-duplex, 12 Gbps stacking ports, shown in
Figure 26.
The AT-x6EM/XS2 has two 10 Gbps SFP+ stacking slots, shown in
Figure 27. Note that the port speed of the AT-x6EM/XS2 is fixed at
10 Gbps.
AT-StackXG

Figure 26. AT-StackXG Stacking Module

AT-x6EM/XS2

Figure 27. AT-x6EM/XS2 Stacking Module

Refer to "VCStack Stacking Module Installation" on page 79 for the
AT-StackXG and AT-x6EM/XS2 stacking module installation instructions.
For more information on stacking see Chapter 2, "Virtual Chassis
Stacking" on page 57 and refer to the Allied Telesis Inc. website
(www.alliedtelesis.com) for the Overview of Virtual Chassis Stacking
(VCS) and the Virtual Chassis Stacking section of the AlliedWare Plus
Operating System Software Reference Guide.
STACK PORT 1 STACK PORT 2
10G LINK ACT 1000 LINK ACT
L/A
1 2
CLASS 1
LASER PRODUCT
L/A
SFP+ SFP+
L/A POWER