Chapter 2. Bios Setup; Introduction; Key Function - Albatron KX18D PRO User Manual

Nvidia nforce4 4x supports socket am2 amd athlon 64 fx/athlon 64 x2 dual-core/athlon 64/sempron processor
Hide thumbs Also See for KX18D PRO:
Table of Contents

Advertisement

Chapter 2. BIOS Setup

Introduction

This section describes PHOENIX-AWARD™ BIOS Setup program which resides in the BIOS
firmware. The Setup program allows users to modify the basic system configuration. The
configuration information is then saved to CMOS RAM where the data is sustained by battery
after power-down.
The BIOS provides critical low-level support for standard devices such as disk drives, serial
ports and parallel ports. As well, the BIOS control the first stage of the boot process, loading
and executing the operating system.
TM
The PHOENIX-AWARD
of an industry standard BIOS. This means that it supports the BIOS of AMD based processors.
This version of the PHOENIX-AWARD
password protection as well as special configurations for fine-tuning the system chipset. The
defaults for the BIOS values contained in this document may vary slightly with the version
installed in your system.

Key Function

In general, you can use the arrow keys to highlight options, press <Enter> to select, use the
<PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit. The
following table provides more detail about how to navigate within the BIOS Setup program.
Keystroke
Up arrow
Down arrow
Left arrow
Right arrow
Esc
Move Enter
PgUp key
PgDn key
+ Key
- Key
Esc key
F1 key
F5 key
F6 key
BIOS installed in your computer system's ROM is a custom version
TM
BIOS includes additional features such as virus and
Move to previous option
Move to next option
Move to the option on the left (menu bar)
Move to the option on the right (menu bar)
Main Menu: Quit without saving changes
Submenus: Exit Current page to the next higher level menu
Move to the option you desire
Increase the numeric value or enter changes
Decrease the numeric value or enter changes
Increase the numeric value or enter changes
Decrease the numeric value or enter changes
Main Menu – Quit and do not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and return to Main Menu
General help on Setup navigation keys
Load previous values from CMOS
Load the defaults from BIOS default table
17
Mainboard K8NF4X-AM2
Function

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K8nf4x-am2

Table of Contents