Removing The Handles And Trim; To Install Option 908 And 913 Instruments - HP 8568B Installation And Verification Manual

To Install Option
908 and 913
Instruments
Option 908 contain the necessary hardware to mount the HP 8568B
without handles in a rack of 482.6 mm (19 in) spacing. Option 913
mounts the HP 8568B with handles.
1. Remove the front-handle trim from each side of the RF and
IF-Display sections. See callout 1 in Figure 2-3.
Figure 2-3. Removing the Handles and Trim
2. Remove the three screws securing each handle, and remove the
handles. See callouts 2 and 3 in Figure 2-3.
Installation 2-7