Rear-Panel Cable Connections - HP 8568B Installation And Verification Manual

8. Check the fuse to make sure it is of the correct rating and type
for the ac line voltage selected. Fuse ratings for different line
voltages are indicated in the following table.
ac Line Voltage IF-Display Section
2 amperes
HP part number 2110-0002 HP part number 2110-0002
1 ampere
HP part number 2 110-0007 HP part number 2 110-0007
9. Insert the correct fuse, and push the fuse-pull lever into its
normal right-hand position.
10. Bolt each instrument section into the rack from its rack mount
flange. Place the IF-Display section just above the RF section.
11. Connect cable W31 between IF-Display section 52 and RF section
J6. See Figure 2-7.
12. Connect cable W30 between IF-Display section Jl and RF section
Figure 2-7. Rear-Panel Cable Connections
FAST BLO 2
SLOW BLO 1 amperes
J4
RF Section
amperes FAST BLO
SLOW BLO
J 5
Installation 2-l 1