Procedure; Db Bandwidths - HP ESA-L1500A User's And Calibration Manual

Performance Verification Tests
10. Resolution Bandwidth Accuracy
Figure 9-9 Resolution Bandwidth Accuracy Test Setup
Use only 75
CAUTION
connectors, or damage to the connectors will occur.

Procedure

1. Connect the equipment as shown in

3 dB Bandwidths

2. Set the synthesized signal generator controls as follows:
3. Press
234
cables, connectors, or adapters on instruments with 75
,
AMPLITUDE 0 dBm
,
AMPLITUDE 6 dBm (75
,
FREQUENCY 50 MHz
on the analyzer, then wait for the preset routine to
Preset
finish. Press
System, Alignments, Auto Align, Off
pressing the following keys:
,
Frequency 50 MHz
,
Span 4.5 MHz
,
BW/Avg 3 MHz
Video BW Auto Man
,
Amplitude Scale/Div 1 dB
Figure
(50 Input only)
Input only)
,
30 Hz
9-9.
. Set the analyzer by
Chapter 9