HP ESA-L1500A User's And Calibration Manual page 182

Equipment
Power Sensor
Power Sensor, 75
(Option 1DP)
Power Sensor, Low
Power
Synthesized Signal
Generator
Spectrum Analyzer,
Microwave
Synthesized
Sweeper
Synthesizer/
Function Generator
Attenuator/Switch
Driver
Chapter 8
Critical Specifications for Equipment
Substitution
Frequency Range: 100 kHz to 1500 MHz
Maximum SWR:
1.60 (100 kHz to 300 kHz)
1.20 (300 kHz to 1 MHz)
1.1 (1 MHz to 2.0 GHz)
Frequency Range: 1 MHz to 1500 MHz
Maximum SWR: 1.18 (600 kHz to 1500 MHz)
Impedance: 75
Amplitude Range: 30 dBm to +20 dBm
Frequency Range: 300 MHz
Amplitude Range: 20 dBm to 70 dBm
Maximum SWR: 1.1 (300 MHz)
Frequency Range: 1 MHz to 1000 MHz
Amplitude Range: 35 to +16 dBm SSB Noise:
< 120 dBc/Hz at 20 kHz offset
Frequency Range: 100 kHz to 7 GHz Relative
Amplitude Accuracy: 100 kHz to 1.5 GHz:
< 1.8 dB
Frequency Accuracy: < 10 kHz @ 7 GHz
Frequency Range: 10 MHz to 1.5 GHz
Frequency Accuracy (CW): 0.02%
Leveling Modes: Internal and External
Modulation Modes: AM
Power Level Range: 35 to +16 dBm
Frequency Range: 0.1 Hz to 20 MHz Frequency
Accuracy: 0.02%
Waveform: Triangle
Compatible with HP 8494G and HP 8496G
Programmable step attenuators
Required Equipment
Test Equipment
Recommended
Use
Model
HP 8482A P,A,T
HP 8483A P,A,T
HP8481D or P,A,T
HP 8484A
HP 8663A or P,A
HP 8642A/B
HP 8566A/B P,T
HP 8340A/B or P,A,T
HP 83630A
HP 33120A or P,A,T
HP 3324A
HP 11713A P
a
181