HP ESA-L1500A User's And Calibration Manual page 170

Immunity Testing
Radiated Immunity
Electrostatic Discharge
Power Requirements
AC Operation
Voltage
Frequency
Power Consumption, On
Power Consumption,
Standby
DC Operation
Serial prefix <US3745
Voltage
Power Consumption
Serial prefix US3745
Voltage, turn-on
Power Consumption, On
Power Consumption,
Standby
Chapter 7
Specifications
Specifications
90 to 250 V rms
47 to 440 Hz
<200 W
<5 W
15 to 20 Vdc
<175 W
12 to 22 Vdc
<175 W
<1 W
Specifications
Supplemental Information
Testing was done at 3 V/m
according to IEC 801-3/1984.
When the analyzer tuned
frequency is identical to the
immunity test signal
frequency there may be
signals of up to 60 dBm
displayed on the screen.
Air discharges of up to 8 kV
were applied according to IEC
801-2/1991. Discharges to
center pins of any of the
connectors may cause damage
to the associated circuitry.
Supplemental Information
For initial voltage 16 Vdc,
turn-off voltage = 16 Vdc.
For initial voltage <16 Vdc,
turn-off voltage = 11.5 Vdc.
General
169