HP ESA-L1500A User's And Calibration Manual page 24

2. Connect the printer using an RS-232 cable.
The following Figure shows examples of some of the printer's switch
configurations set up for 9600 baud. See your printer's
documentation for more specific information.
Figure 1-2 9600 Baud Settings for Serial Printers
To set the spectrum analyzer baud rate to 9600, press:
3. Select the printer configuration for your spectrum analyzer by
pressing the appropriate keys. (See "Selecting a Printer" in this
chapter).
Chapter 1
System
Printer
Port
Serial
(appears in the menu only when
Baud Rate
9600
Enter
Preparing for Use and Printing
Printing with RS-232
is selected)
Serial
23