HP ESA-L1500A User's And Calibration Manual page 267

Performance Verification Tests
16. Other Input Related Spurious Responses
20.On the analyzer, press
21.For the first two frequencies listed in
Table 9-18 Spurious Responses
Synthesized Sweeper CW
542.8 MHz
510.7 MHz
1310.7 MHz
22.On the synthesized sweeper, press
23.On the analyzer press the following keys:
266
finish. Set the analyzer by pressing the following keys:
,
Frequency 500 MHz
,
Span 10 MHz
,
Amplitude Attenuation Auto Man
Peak Search
,
Frequency Signal Track On Off
,
Span 200 kHz
Wait for the Span 200 kHz message to disappear. Press the
following analyzer keys:
,
Search Mkr Ref Lvl
,
Frequency Signal Track On Off
Peak Search, Marker
Single Sweep
a. Set the synthesized sweeper to the listed CW frequency by
pressing ,
RECALL
for a CW frequency of 510.7 MHz.
2
b. Press
Single Sweep
c. On the analyzer, press
amplitude reading in the performance verification test record as
indicated in Table
Frequency
Sweep, Sweep Cont Single
Frequency, 100 MHz
Amplitude, 5 dBm (50
Amplitude, + 48.76 dBmV (75
, then wait for the preset routine to
Preset
,
10 dB
(On)
(Off)
,
Marker
Table
for a CW frequency of 542.8 MHz or
1
and wait for the completion of a new sweep.
and record the marker delta
Peak Search
9-18.
TR Entry (Mkr )
1
2
3
RECALL 4
(Cont)
Input only)
Input only)
9-18, do the following:
RECALL
Chapter 9
,