Terminal Module
An optional terminal module is available for making external connections to
the HP 1399A Breadboard Module. This module consists of a connector
mounted on a breadboard so that you can access the connector pins by
soldering wires to the breadboard. Figure 2-4 shows the layout of this
terminal module. Figure 2-5 shows how to make the connections and install
the module.
Warning
Since the inputs to the HP 1399A Breadboard Module are
through a 96-pin connector and a terminal card assembly, limit
voltage to 250Vdc/250Vrms.
For electrical shock protection, ensure that the module face
plate is securely tightened against the mainframe before
installing the terminal card.
Figure 2-4. Terminal Module Assembly
20 Configuring the HP E1399A
Chapter 2