Integration Services And Software; Hp Ups Sizing Tool; Additional Resources; Mcs Documentation Cd - HP MCS Manual

Modular cooling system

Table of Contents

Integration services and software

Several resources are available for planning HP MCS configurations.

The UPS Sizing tool is an online tool that collects information on power consumption requirements and

then provides the correct UPS product for those requirements.

For additional information on the UPS Sizing tool, refer to

http://www.upssizer.com/selector.asp

The Documentation CD shipped with the MCS and provides documentation for installing and

optimizing the MCS.

The MCS management module (Figure 3) is located inside of the MCS front door. The management

module can be accessed remotely through a web interface, and can be used to analyze, query, and

manage various measurements in the MCS unit. If a parameter is out of the specified threshold, either

a warning or alarm message displays on the operator display and on the web interface.

Figure 3. MCS management module

The following sections describe components and options available for the MCS that may be necessary

to achieve safety, regulatory compliance, or functionality requirements.

Either of the following conditions may be necessary for compliance with certain safety certifications:

• The HP MCS must be located in a restricted access area that is only accessible to trained personnel.

-Or-

• The HP MCS must be configured with lockable hardware.

HP MCS front doors, rear doors, and side panels support this locking requirement. Rear split doors

are standard on the MCS.

Table of Contents