Specifications - Follett C/E12CI400A Installation, Operation & Service Manual

Specifications

407mm
(16")
Dispenser front view
Electrical
220V 60Hz, 1 phase, 6.5 amps
230V 50Hz, 1 phase, 6.5 amps
Furnished with 1.8m (6 ft) power cord
Ambient
Air temp
Water temp
Water pressure
Plumbing
Dispenser drain
Water inlet
Note: Water shut-off recommended within 3m (10 ft) of dispenser. Drain to be hard-piped and insulated. Maintain
at least 20mm per 1m run (1/4" per foot) of slope.
Ventilation clearances
6" (153mm) on right side of dispenser, 6" (153mm) at top for ventilation and 12" (305mm) at top recommended for
service.
Note: Do not block right side air intake or top air exhaust
Dry weight
79.4kg (175 lbs)
575mm
(22.625")
102mm
(4")
Dispenser side view
38°C/100°F Max.
32°C/90°F Max.
5Bar Max./70 P.S.I.
C/E12CI400A
3/4" FPT
3/8" FPT
Air
826mm
intake (32.5")
458mm
(18")
597mm
(23.5")
10°C/50°F Min. (Best performance below 80°F/27°C)
4°C/40°F Min. (Best performance below 70°F/21°C)
.7 Bar/10 P.S.I. Min.
C/E12HI400A
3/4" FPT
3/8" FPT
4
air exhaust
3/4" FPT drain
3/8" FPT
water inlet
air
intake
DRAIN
Dispenser rear view
ICE MACHINE
MAKE-UP WATER
power cord