Initial Setup - Focus ProHD DR-HD100 User Manual

DR-HD100: Using with a Computer
To move video files from the DR-HD100 to a computer:
• Connect the DR-HD100's
a computer with an active OHCI compliant IEEE-1394
FireWire port and the necessary FireWire disk drive drivers.
For More Information
Go to the FOCUS Enhancements' website (www.focusinfo.com) for
more compatibility information.
• Use the DR-HD100 HDD Bypass mode, refer below for more
information.
The DR-HD100 is compatible with any computer system that can
read FAT 32 volumes, such as Windows 98SE/ME/2000/XP and Mac
OS9/OS10.

Initial Setup

Step 1:
Enter HDD mode and enable DD Drive.
This step is required before mounting the DR-HD100 to a
computer.
• On the DR-HD100 go to the HDD screen.
• Select DD Drive and Right arrow to Connect screen.
• Press Enable function button.
Refer to the section, "HDD Mode Screen" on page 57
Step 2: Connect the DR-HD100 through its
to the computer system using a standard 6-pin to 6-pin FireWire
cable.
Step 3:
Connect power to the drive if necessary.
Step 4: Consult the computer's documentation for more information.
36
Computer I/O
COMPUTER I/O
ProHD DR-HD100 Portable DTE Recorder
1394 port directly to
1394 port