For information about using ftServer Management Console (ftSMC), see the following
topics:
•
"CPU and I/O Enclosures and Elements" on page 3-1
•
"ftSMC Overview" on page 3-2
•
"Running ftSMC" on page 3-2
•
"Performing ftSMC Tasks" on page 3-6
For information about the Virtual Technician Module (VTM), see the
Express5800/320Ma Virtual Technician Module User's Guide and ftSMC snapin help.
CPU and I/O Enclosures and Elements
Each system houses two CPU- I ⁄ O enclosures. Each enclosure contains a CPU
element and an I/O element joined to the same board. You can monitor each CPU
element and I/O element separately. ftSMC represents these elements in the following
nodes:
•
CPU Enclosure - 0 and CPU Enclosure - 1
•
I/O Enclosure - 10 and I/O Enclosure - 11
Discussions of CPU enclosures and I/O enclosures apply equally to the correspinding
parts of CPU- I ⁄ O enclosures, unless otherwise specified.
ftServer Management Console
Chapter 3
ftServer Management Console
3-
3-1