Ftsmc Overview; Running Ftsmc; Running Ftsmc Directly On Your Express5800/320Ma System - NEC Express5800/320Ma Administrator's Manual

ftSMC Overview

ftSMC Overview
ftSMC, an MMC snap-in, is the system management tool you use to monitor and control
the operation of your system. ftSMC works with ftServer Manager (ftSM) to present a
list of the system components in the console tree and properties of the component in
the details pane.
ftSM gathers information about the system hardware and software components. ftSMC
presents the information that ftSM gathers. ftSM runs only on Express5800/320Ma
systems. ftSMC runs on Express5800/320Ma systems and on systems running
Windows 2000, Windows Server 2003, or Windows XP.

Running ftSMC

You can run ftSMC:
•
Directly on Your Express5800/320Ma system
•
On a remote computer
•
From a remote computer by accessing your Express5800/320Ma system desktop
remotely

Running ftSMC Directly on Your Express5800/320Ma System

Click the ftServer Management Tools shortcut on your system's desktop.
Or, do the following:
1. Click the Start button, and then click Run.
2. Click Browse, navigate to C:\Program Files\Stratus\management, and then click
ftServer.msc.
3. Click OK.
3-2 Express5800/320Ma: System Administrator's Guide
N O T E S
1. Use ftSMC to disable devices. Do not use Windows
Device Manager to disable devices except in
documented special situations.
2. MMC snap-ins, including ftSMC, do not lock edit
sessions to prevent simultaneous users from editing
the same parameters.