Diagrams Of Component Locations; System Elements And Internal Storage Disk Locations - NEC Express5800/320Ma Administrator's Manual

Locating Components
Table 5-1. System Devices and Device IDs
Component
Level
2
3
4
Device IDs and device paths apply only to hardware components. Logical devices (for
example, two physical Ethernet ports partnered to provide a single fault-tolerant path
to the network) and software components do not have device IDs even if they appear
in the ftSMC interface.

Diagrams of Component Locations

See Figure 5-3
If a component is shown as failed or failing in ftSMC, note its device ID and then use
the following information to locate that component within the system. All top-level
components have a physical label that includes their device ID.

System Elements and Internal Storage Disk Locations

Figure 5-3 shows the locations of the CPU and I/O elements and disk slots. The
internal storage is housed in an enclosure located above the CPU- I ⁄ O enclosure.
5-8 Express5800/320Ma: System Administrator's Guide
Device
DIMM
Processor
Storage Enclosure (internal)
BMC
Mass Storage Controller
SATA Controller
USB Controller
VGA Controller
VTM Adapter
Ethernet Controller
PCI to PCI Bridge
First PCI-X slot
on riser card
PCI Slot Info
Port
Network Port
Slot
Disk (internal)
to locate I/O and CPU elements for your
Device
ID
0–7
20–23
40
120
0
1
2
3
4
5
6, 7
8
9–11
0–2
0,1
1–3
0–2
Express5800/320Ma system.