Running Ftsmc On A Remote Computer; Adding The Ftserver Management Console Snap-In To Mmc - NEC Express5800/320Ma Administrator's Manual

Running ftSMC on a Remote Computer

You can manage your system by running ftSMC on a remote system or on any system
running Windows 2000, Windows Server 2003, or Windows XP.
1. Install ftSMC on a supported computer: Use the Remote Management Installation
(RMI) procedure described in the Express5800/320Ma: Software Installation and
Configuration Guide.
2. Add the ftSMC snap-in to
that contains the snap-in.
To manage systems you have added to a console,
console that contains ftSMC.

Adding the ftServer Management Console Snap-in to MMC

1. From the Start menu of the remote computer, click Run, type mmc in the Open
box, and click OK.
2. In MMC, click the Console menu item, and click Add/Remove Snap-in.
3. In the Add/Remove Snap-in dialog box, click Add.
The Add Standalone Snap-in dialog box appears with a list of snap-ins.
4. Click ftServer Management Console and click Add.
The Connect dialog box appears.
5. Type the servername.domainname or the IP address of the server (for example,
usbos01.wtcus.com or 192.168.57.10), and select or clear the Connect as
current user check box. If you clear the check box, type the user name and
password that will be used to make the connection. Click Finish.
6. Click Close in the Add Standalone Snap-in dialog box.
7. Click OK in the Add/Remove Snap-in dialog box.
The name of the system appears in MMC. The ftSMC snap-in displays information
about the system and you can use the ftSMC snap-in to manage the system.
MMC, specify a system to manage, and save the console
N O T E S
1. The user name that you enter must be in the Windows
Administrators group for the computer that you want
to manage.
2. You can select any remote Express5800/320Ma 3.2
GHz, 3.6 GHz or Dual-Core system to manage, as
long as you have appropriate access to it.
open a previously saved MMC
ftServer Management Console
Running ftSMC
3-3