Cleaning And Care; Appliance Front And Control Panel; E-Cloth; Aluminum Fronted Appliances - Miele H 373 Pyrolytic Operating Instructions Manual

Cleaning and care

All external surfaces and controls
can be cleaned using warm water
with a little washing up liquid applied
with a soft sponge or cloth.
Wipe the surfaces dry using a soft
cloth.
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part number 98013530, which is suit-
able for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals.
It can be washed 300 times.
To prevent the risk of scratches and
damage to the surface structure of
glass, stainless steel and aluminium
fronted appliances pay particular atten-
tion to the following cleaning instruc-
tions.
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– abrasive cleaning agents, e.g. pow-
der cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been pre-
viously used with abrasive cleaning
agents,
– oven sprays.
Clean the door handle and the control
elements regularly, preferably after
each use.
This will help prevent grease or other
deposits adhering to surfaces and be-
coming difficult to remove.
Aluminium is affected by the way that
light falls on it, by the surrounding envi-
ronment and by the angle you observe
it from.
Aluminium surfaces and controls
may suffer discolouration or dam-
age if acids, alkalis or soiling are
left on them for too long. Remove
these straight away.
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g. pow-
der cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been pre-
viously used with abrasive cleaning
agents,
– stainless steel cleaners,
– cleaning agents containing descal-
ing agents,
– diswasher detergent,
– oven sprays.
55