Adaptec Command Line Utility User Manual page 37

Logical drive options:
●
verify_fix (Verify with fix)—verifies the logical drive redundancy and repairs the drive if
●
bad data is found.
verify—verifies the logical drive redundancy without repairing bad data.
●
clear—removes all data from the drive.
●
Physical device options:
●
verify_fix—verifies the disk media and repairs the disk if bad data is found.
●
verify—verifies the disk media without repairing bad data.
●
clear—removes all data from the drive.
●
initialize—returns a drive to the READY state (erases the metadata).
●
secureerase [password]—removes all data from the drive in a secure fashion to prevent
●
any possible recovery of the erased data. See
about setting the password.
Examples
ARCCONF TASK START 1 LOGICALDRIVE 1 VERIFY
ARCCONF TASK START 1 DEVICE 0 0 INITIALIZE
Chapter 2: Using the Command Line Utility
arcconf atapassword on page 18
37
●
for details