Arcconf Identify; Arcconf Imageupdate - Adaptec Command Line Utility User Manual

arcconf identify

Identifies a physical or logical device by blinking its LEDs.
Syntax
ARCCONF IDENTIFY <Controller#> LOGICALDRIVE <LogicalDrive#>
ARCCONF IDENTIFY <Controller#> DEVICE <Channel#> <ID>
Parameters
Controller# is the controller number
LogicalDrive# is the number of the logical drive to be identified
Channel# is the channel number for the device to be identified
Device# is the device number for the device to be identified
Examples
ARCCONF IDENTIFY 1 DEVICE 0 0
ARCCONF IDENTIFY 1 ALL

arcconf imageupdate

Allows new firmware to be flashed to the hard drive.
Syntax
ARCCONF IMAGEUPDATE <Controller#> DEVICE <Channel# ID# ChunkSize# Filename>
[Mode#] [noprompt]
Parameters
Controller# is the controller number
Channel# is the channel number of the device to be updated
ID# is the device number of the device to be updated
ChunkSize# is the chunk size, in bytes, to be used to update the firmware
Note:
For SATA drives, the chunk size must be a multiple of 512.
Filename is the name of the firmware update file
Mode# is the firmware update mode. Valid values are:
3-(SATA) Download with offsets and save image for immediate and future use
●
7-(SAS) Download microcode with offsets, save, and activate
●
Noprompt is an optional parameter that suppresses alert messages.
Example
ARCCONF IMAGEUPDATE 1 DEVICE 0 83 16384 ados.lod 3
Chapter 2: Using the Command Line Utility
25
●