Miele H 212 B Operating Instructions Manual page 60

Installation instructions
These hobs are classified in Germany
as "Y" class for heat protection. They
must be positioned so that there is ade-
quate ventilation. There may be a wall
at the rear, and wall or tall units at one
side. On the other side however no unit
or divider must stand higher than the
hob.
Because of the heat given off, there
must be a minimum distance as fol-
lows:
– 40 mm between the hob cut-out
and adjacent furniture, e. g. tall
unit.
– 50 mm between the back wall
and the hob cut-out.
60
The template provided with the hob
must be used when cutting out the
worktop, (cut-out with rounded
edges).
* building-in height
* building-in height
Prepare the worktop cut-out as
shown in the illustrations.