Miele H 212 B Operating Instructions Manual page 55

All electrical work should be under-
taken by a competent person in
strict accordance with national and
local safety regulations.
The
on the data plate, visible when the
oven door is open. Please ensure that
these match the household mains sup-
ply. Please quote these data, and the
model and serial number when contact-
ing the Miele Service dept.
Connection of this appliance should be
made either via a fused connection unit
(rated load under 3000 W), or via a suit-
able isolator (rated load over 3000 W),
which complies with national and local
regulations, and which is accessible
after the appliance has been built in.
The appliance is supplied with a 3-core
cable for connection to a 230-240 volt
50 Hz supply.
The wires are coloured in accordance
with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
In other countries check these details
with your supplier.
Electrical connection U.K.
The version of the built-in oven with
hob controls may only be combined
with one of the hobs listed below, (not
all units are available in every country):
are given
KM 210
KM 212
KM 200
KM 201
KM 202
55