Instructions for building-in
Instructions for building-in
These hobs are classified as "Y" class
for heat protection. There may be a wall
at the rear and wall or tall units at one
side. On the other side, however, no
unit or divider must stand higher than
the hob.
There must be a minimum distance
of 250 mm between the hob and ad-
jacent furniture, (e.g. tall unit) owing
to the heat radiated from the ele-
ments.
The distance between the grill and
a cooker hood should be at least
650 mm.
Prepare the worktop cut-out as illus-
trated.
Dimension "B" applies for a combina-
tion of appliances and is given on
the chart.
16
2 zone Combiset
1 element
2 elements
3 elements
4 elements
5 elements
4 zone Combiset
1 elements
2 elements
3 elements
Combination
One 2 zone
+ one 4 zone
Two 2 zone
+ one 4 zone
Three 2 zone
+ one 4 zone
One 2 zone
+ two 4 zone
Two 2 zone
+ two 4 zone
Extractor (e.g. DA 8-2)
For building in between two appliances:
- Dimension B increases by 90 mm.
For building in at the end of a combination:
- Dimension B increases by 98 mm.
Width
Depth
(=
in
Dimen-
mm
sion B)
in mm
490
265
490
558
490
851
490
1144
490
1437
490
560
490
1143
490
1728
490
851
490
1143
490
1437
490
1436
490
1729