Upc-A Bar Code - Microcom 470 Operator's Manual

Chapter 4
))))))))))))))))))))))))))))))))))))))))))))
CC CHARACTER COUNT
This parameter determines the number of characters that will be used in a field. If the
number of characters in the selected text string is more than the quantity specified by
CC, then the remainder of the text string is ignored. If the text string has less than the
number of characters specified by this parameter, then only those characters defined
by the text string are printed. For example, the text string - MICROCOM - would be 8
characters long.
TCI TEXT CONVERSION IDENTIFIER
This parameter determines what form the text string will be printed in. The following
values define which text conversion method is used:
1
2
3
8
11
12
13
14
15
16
*17
20
21
*22
*23
24
25
26
*28
*29
*32
*33
36
40
41
42
43
44
* Refer to Section 7.1.1 on how to use these TCI's.
Example: For the string - 1234567
A TCI of 1 would print ASCII text.
A TCI of 42 would print a Codabar bar code.
))))))))))))))))))))))))))))))))))))))))))))
470 Operators Manual
Text (ASCII)
Text Surrounded by Asterisks (Code 3 of 9)
Text with UPC-A/UPC-E Checksum Digit Printed
Non-Volatile Downloadable Fonts
Volatile Downloadable Fonts

UPC-A Bar code

UPC-E Bar code (SEND 11 DIGITS)
UPC-E Bar code (SEND 7 DIGITS)
Interleaved 2 of 5 Bar code
Code 3 of 9 Bar code
Text with UPC-E Checksum and Extended Bars Added
EAN-13 Bar code
EAN-8 Bar code
Text with EAN-13 Checksum and Extended Bars Added
Text with EAN-8 Checksum and Extended Bars Added
MSI 1 (Plessey)
MSI 2 (Plessey)
MSI 3 (Plessey)
Text with MSI Checksum Added - Type 1
Text with MSI Checksum Added - Type 2
Text with UPC-A Checksum and Extended Bars Added
Text with UPC-A With Extended Bars Added
Postnet
Code 128 bar code (Automatic Compression)
Code 128 bar code (No Compression)
Codabar bar code
Code 93 bar code
AS-10 bar code
Designing Labels Using LDS
25