To replace nylon line.
•
IMPORTANT
Always wind the line onto the upper section of
the spool first.
•
Remember ! Your Flymo Trimmer is designed to
use only nylon line with a maximum diameter of
1.5mm. Use only genuine Flymo nylon line.
(Q)
(P)
•
Ensure spool is fully located by gently rotating it dur-
ing fitment, whilst keeping the spoolholder steady.
• WARNING
Disconnect from the mains electricity supply,
before attempting any maintenance or adjustment.
Cutting head continues to rotate after the trimmer
has been switched off. Keep fingers and hands
clear of the line cutter on leading edge of guard.
Caring for your Multi-Trim Revolution
(Fig T)
• Never use a damaged trimmer.
Spool cap and nylon line cont'
R
Maintenance
(Fig S)
Environmental Information
Q
R
SECURING LINE INTO CLEATS
S
T
6