Advertisement

Original Instructions
For all customer enquiries or for replacement parts, contact:-
¤
01325 300303
www.flymo.com
customer.services@husqvarna.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT21 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Flymo MT21

  • Page 1 Original Instructions For all customer enquiries or for replacement parts, contact:- ¤ 01325 300303 www.flymo.com customer.services@husqvarna.co.uk...
  • Page 2: Carton Contents

    The operator is responsible for following the warning and safety instructions in this manual and on the trimmer. Explanation of Symbols on the Mini Trim/MT21 The use of eye protection is recommended to protect against objects thrown by the cutting line.
  • Page 3 4. Immediately disconnect from the mains electricity 4. On slopes, be extra careful of your footing and wear supply if the cable is cut, or the insulation is dam- non-slip footwear. aged. Do not touch the electric cable until the elec- 5.
  • Page 4: Starting And Stopping

    Safety Guard Assembly (B) & (C) 1. Locate the safety guard (B1) over the cutting head Mini Trim/MT21 Mini Trim Auto/ (B2). Ensure the nylon line is fed through the hole in Auto +/MT25 the safety guard as illustrated in fig B.
  • Page 5: Manual Line Feed System

    Manual Line Feed System To feed the nylon line 1. Press and hold the two latches (H). 2. Gently pull the line until it reaches the line cutter. 3. Release the two latches. Check that the spool is locked in position. 4.
  • Page 6: Automatic Line Feed System

    Automatic Line Feed System How the automatic line feed works (M) 1. When initially switching on the trimmer, a small length of line is fed out. 2. A ʻclatteringʼ noise will be heard when the nylon line hits the line cutter. DO NOT BE ALARMED this is quite normal.
  • Page 7: Maintenance

    Fault Finding Chart (Automatic Line Feed only) WARNING Disconnect from the mains electricity supply before attempting any maintenance or adjustment. FAULT CHECK ACTION Is the automatic line feed work- Manually feed out line. ing? LINE NOT FEEDING Is the line fed out and visible? Remove cap and spool, free line LINE TOO SHORT Has line been removed from...
  • Page 8: Service Recommendations

    Service Recommendations • Your product is uniquely identified by a silver and black product rating label. • We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. Guarantee & Guarantee Policy If any part is found to be defective due to faulty manufacture Failures not covered by guarantee within the guarantee period, Husqvarna UK Ltd., through its Au-...

This manual is also suitable for:

Mt25Mini trimMini trim autoMini trim auto+

Table of Contents