Table of Contents
Advertisement
3. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the blade to stop and slide the protective cover over
the blade before you maintain the product.
To clean the Hedge Trimmer [ Fig. M1 ]:
DANGER! Risk of injury!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(in particular high-pressure water jet).
v Do not clean with chemicals including petrol or solvents.
Some can destroy critical plastic parts.
The airflow slots must always be clean.
1. Clean the product with a damp cloth.
2. Clean the airflow slots
(6)
with a soft brush (do not use a screwdriver).
To clean the charging power supply:
Make sure that the contacts of the charging socket and the charging
power supply always are clean and dry before you connect the charging
power supply.
Do not use running water.
v Clean the contacts and the plastic parts with a soft and dry cloth.
4. STORAGE
To put into storage:
The product must be stored away from children.
1. Charge the battery.
2. Clean the hedge trimmer and the charging power supply
(see 3. MAINTENANCE).
3. Store the hedge trimmer and the charging power supply in a dry,
enclosed and frost-free place.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal household
waste. It must be disposed of in line with local environmental
regulations.
The FLYMO battery contains lithium-ion cells that should
not be disposed of with normal household waste at the
end of its life.
IMPORTANT!
v Dispose of the product through or via your municipal recycling
collection centre.
5. TROUBLESHOOTING
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the blade to stop and slide the protective cover over
the blade before you troubleshoot the product.
Problem
Possible Cause
Hedge is not cleanly cut
Blade is blunt or damaged.
Hedge trimmer does not
Under voltage.
start. Charging control
;
lamp
flashes green
Hedge trimmer does not
Battery overload.
start. Charging control
;
lamp
flashes red
Blade is blocked.
Hedge trimmer does not
Battery temperature is out of
start. Charging control
range.
lamp
;
flashes red
6
Problem
Power LED
charging power supply
does not illuminate
6. TECHNICAL DATA
Battery Hedge Trimmer
Strokes
Length of blade
Tooth gap of blade
Weight
Sound pressure level L
Uncertainty k
Sound power level L
measured/guaranteed
Uncertainty k
Hand/arm vibration a
Uncertainty k
Measuring process complying with:
exposure. The vibration emission value can vary during actual use of the electric power
tool.
Battery
Battery voltage
Battery capacity
Battery charging time
80 % / 100 % (approx.)
Charging Power Supply
Mains voltage
Mains frequency
Rated Power
Output voltage
Max. output current
Li-ion
7. ACCESSORIES
FLYMO Charging Power
Supply
8. SERVICE / WARRANTY
Service:
Please contact the address on the back page.
Warranty statement:
In the event of a warranty claim, no charge is levied to you for the services
Remedy
provided.
Husqvarna UK Ltd. grants a warranty for all original FLYMO new products
v Get the blade sharpened
by a professional.
for two years from the date of original purchase from the retailer, provided
that the devices have been for private use only. This manufacturer's
v Charge the battery.
warranty does not apply to products acquired second hand. This warranty
includes all significant defects of the product that can be proved to be
material or manufacturing faults. This war ranty is fulfilled by supplying
v Release the start levers.
a fully functional replacement product or by repairing the faulty product
Start again.
sent to us free of charge; we reserve the right to choose between these
options. This service is subject to the following provisions:
v Remove the obstacle.
Start again.
• The product has been used for its intended purpose as per the recom-
mendations in the operating instructions.
v Use the battery in surround-
ings where temperatures are
• Neither the purchaser nor a third party has attempted to open or repair
between 0 °C and 40 °C.
the product.
Possible Cause
(Lc)
on the
Charging power supply is not
plugged in correctly.
NOTE: For any other malfunctions please contact the FLYMO service depart-
ment. Repairs must only be done by FLYMO service departments or specialist
dealers approved by FLYMO.
Unit
Value (PNC 967986201)
1/min
2400
cm
40
mm
16
kg
2.2
75
1)
dB(A)
pA
3
pA
:
2)
WA
85 / 91
dB(A)
6
WA
< 2.5
1)
m/s
2
vhw
1.5
a
EN 60745-2-15
1)
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
Unit
Value
V (DC)
14.4
Ah
2.0
min.
160 / 200
Unit
Value (PNC 598446701)
V (AC)
100 – 240
Hz
50 – 60
W
15
V (DC)
18.5
mA
600
Charger to charge the internal batteries.
Remedy
v Plug the charging power sup-
ply into a wall outlet.
RL 2000/14/EC
2)
PNC 598446701
Advertisement
Table of Contents
