Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Flymo Cordless Multi-Trim MCT250
Summary of Contents for Flymo Cordless Multi-Trim MCT250
- Page 1 ®...
-
Page 2: Carton Contents
& INSIDE BACK COVER Carton Contents handle bolt steady handle IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Flymo/Partner Customer Service Department direct Telephone :... - Page 3 If not used properly this trimmer can be dangerous! This trimmer can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this trimmer. The operator is responsible for following the warning and safety instructions in this manual and on the trimmer.
- Page 4 4. Check that the cutting head, spool and cap are fitted correctly. 1. Use the trimmer only in daylight or good artificial light. 2. Avoid operating your trimmer in wet grass, where feasible.
- Page 5 The black lead should always be connected to the black terminal on the battery. For further information on Battery replacement contact Flymo/Partner Customer Service direct:- Telephone Bench Top Re-charging The wall bracket can also be used as a "bench top"...
-
Page 6: Assembly Instructions
C. 2. Align the arrow on the top of the safety guard (C3) with the arrow on the side of the trimmer (C4). See figs C & D. 3. Push into location and turn safety guard... -
Page 7: Fitting The Wall Bracket
See Fig H. Ensure that when the trimmer is attached the bottom of the trimmer is within 4 inches (100 mm) of the ground, this will make it easier to hang the trimmer and will also ensure that the wall bracket is within easy reach of an electric socket to allow the charger to be plugged in. -
Page 8: Handle Adjustment
Attach steady handle to product using bolt and handle knob as shown in Fig I. Adjust the steady handle to a comfortable operating position, see Fig J., by unscrewing the handle knob, springing the side lugs apart, moving the handle to the required position, carefully re-engaging the teeth and then tightening the handle knob. -
Page 9: How To Trim And Edge
How to trim Cut with nylon line at an angle using the tip. See Fig N Swing trimmer in and out of the cutting area taking small cuts (O) Line is fed out automatically every time the trimmer head stops rotating and returns to operating speed. -
Page 10: Nylon Line
W, then drop the spool into the spoolholder smooth side uppermost. Caring for your Cordless Trimmer After you have finished using your Flymo trimmer follow the procedure below: Never clean your trimmer with water, cleaning fluids, or solvents, just remove debris with a suitable tool, a soft brush or dry cloth. - Page 11 6. Trimmer stops during use Release switch lever and wait 30 seconds before re-starting. Service Recommendations 1. Always use genuine Flymo Spare Parts. 2. Prepacked spares are available from most Flymo/Partner stockists. 3. If you have a problem with your machine...
- Page 12 Flymo/Partner, or by the machine having been modified in any way.
-
Page 13: Certificate Of Conformity
Environmental Information Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life. •... - Page 14 Make ........
- Page 15 The use of eye protection is recommended to protect against objects thrown by the cutting line. Flymo Safety Glasses are available from most leading stockists GUIDE PRICE GUIDE PRICE £3.49 £3.49 ONLY ONLY Contact your nearest stockist or telephone (01325) 300303 for more details...
Need help?
Do you have a question about the Cordless Multi-Trim MCT250 and is the answer not in the manual?
Questions and answers