Introduction
The InterServe 600 Series System Reference provides technical, servicing, and upgrading information
for InterServe 615, 615UW, 625, 625UW, 635, and 645 systems.
NOTE
For information about InterServe 610, 620, 630 and 640 servers, refer to DHAF02030.
Restrictions
In the servicing instructions, heed all warnings and cautions. Some precedures may only be performed
by trained Intergraph Field Service personnel. Personal injury and damage to equipment can occur if
documented procedures are not followed.
WARNING
For InterServe 635 and 645 systems, hazardous energy levels exist in the system base unit due
to the constant AC-supply design of the power supplies. Disconnect the power cord from the
system before opening the base unit.
CAUTION
Use an antistatic wrist strap for all servicing and upgrade procedures to avoid the possibility of
electrostatic discharge.
Conventions
Bold
Italic
Monospace
SMALL CAPS
+
CTRL
D
Additional System Information
A System Setup is shipped with each system, and provides detailed information about:
u
Setting up the system.
u
Configuring the operating system and associated system software.
u
Using the system.
u
Using the AMIBIOS Setup program.
u
Installing system software.
Commands, words, or characters that you key in literally.
Variable values that you supply, or cross-references.
Output displayed on the screen.
Key names on the keyboard, such as
directories. You can type filenames and directory names in the dialog boxes or
the command line in lowercase unless directed otherwise.
Press a key while simultaneously pressing another key; for example, press
and
simultaneously.
D
,
or
3. Names of files and
D
ALT
F
ix
CTRL
Need help?
Do you have a question about the InterServe 600 Series and is the answer not in the manual?