Finish The Installation - Intergraph Intense 3D Voodoo Installation Manual

Finish the Installation

To finish the installation:
1. Close the computer.
2. Connect the computer monitor's video cable to the video out port
on the Intense 3D Voodoo card. See the following figure.
3. Connect other cables to the output ports on the Intense 3D Voodoo
card, as appropriate. See the following figure.
Stereoscopic
Glasses
Install the Intense 3D Voodoo driver as instructed in Chapter 4,
"Installing the Software."
Composite
Video Out Video Out
S-video
Out
9