Intergraph Intense 3D Voodoo Installation Manual page 19

3. Click Change, located next to the Adapter Type list box. The
Select Device dialog displays.
4. Click Have Disk. The Install From Disk dialog displays.
5. Insert the I3D Drivers CD-ROM in the computer's CD-ROM
drive.
6. Click Browse. The Open dialog displays.
7. In the Drives box, select the CD-ROM drive. In the File Name
box, the filename
dialog closes and you return to the Install From Disk dialog.
8. Click OK to close the Install From Disk dialog. Ensure that the
Intense 3D Voodoo driver displays in the Models list on the Select
Device dialog.
9. Select the Intense 3D Voodoo driver from the Drivers list, and
then click OK. The driver files are installed on your computer.
After the files install, the Intense 3D Voodoo displays in the
Adapter Type box.
10. Click Close to close the Change Display Type or Advanced
Display Properties dialog, as appropriate.
11. Click Close to close the Display Properties dialog.
12. When asked to restart the computer, click Yes.
NOTE If the Intense 3D Voodoo driver does not start, use the correct
procedure to shut down and turn power off to your computer.
Then turn power on to your computer.
14. Allow the computer to restart, and log onto Windows 95.
NOTE The Intergraph Video Center (also known as TV Out Utilities) is
automatically installed during the Intense 3D Voodoo driver
installation. You may also choose to install the DirectX
application. For more information, see "Installing the Application
Programs" in this chapter.
. displays. Click OK. The Open
AUTORUN INF
15