Table of Contents
Advertisement
18
Removing Intense 3D Voodoo Software
You may wish to remove Intense 3D Voodoo software from your
computer at some time in the future.
If your computer is running Windows NT 4.0, you do not have to
manually remove the Intense 3D Voodoo software. Windows NT 4.0
correctly removes the drivers when you restart the computer after
removing the Intense 3D Voodoo card.
If your computer is running Windows 95, you must manually remove
the Intense 3D Voodoo utilities and drivers.
To remove the Intense 3D Voodoo utilities under Windows 95:
1. From the Start menu, go to Settings/Control Panel/Add-Remove
Programs. The Remove dialog displays.
2. Select Intense 3D Voodoo Control Applet.
3. Click Add/Remove.
4. When the files are removed, click OK to close the Remove dialog.
To remove the Intense 3D Voodoo driver software under Windows
95:
1. From the Start menu, go to Settings/Control
Panel/Display/Settings (tab).
2. Do one of the following:
3. Click Change, located next to the Adapter Type list box. The
Select Device dialog displays.
4. Click Show All Devices.
5. In the Manufacturers box, select Standard Display Types.
6. In the Models box, select Standard Display Adapter (VGA), and
then click OK to close the Select Device dialog.
If you are using the commercially-available release of
Windows 95, click Change Display Type. The Change
Display Type dialog displays.
If you are using Windows 95 OEM Service Release 2, click
Advanced Properties. The Advanced Display Properties
dialog displays.
Advertisement
Table of Contents
