Intergraph Intense3D Wildcat 4105 Hardware User's Manual page 13

Option 1:
1. Remove the 5-pin mini DIN to DB9 cable (part #69960) from the EPRO emitter.
2. Connect the female DB9 plug on the power supply (part #82011 for 120VAC or #82016 for
220VAC) to the male DB9 connector on the EPRO emitter and plug the other end into an AC
outlet. This provides 12V DC to the EPRO emitter.
3. Connect the 3-pin mini DIN to BNC cable (part #0920017) from the 3-pin mini DIN port on
the graphics card to the male BNC connector on the EPRO emitter.
Option 2:
Replace the Stereo Graphics, Inc. EPRO emitter with the Stereo Graphics, Inc. ENT emitter.
NOTE The ENT emitter is designed to plug directly into the new 3-pin VESA port, but is
designed to accept 12V in addition to the 5V that the new VESA port provides.
It is recommended that all new shipments of Crystal Eyes Wireless Stereo Glasses use the ENT
emitter with the "Intergraph 5-Pin Plug to VESA 3-Pin Jack" adapter cable (part #0920015). This
supports both the 5-pin and the 3-pin cases with one simple converter cable. The new Crystal Eyes
Wired product should ship with the adapter cable as well.
5