Intergraph TDZ 2000/ExtremeZ Manual page 9

7
95, you must disable the use of Hardware Monitor on the system. To do this, run the BIOS Setup
program, and set the H/W Monitor, Primary I/O Port parameter in the Chipset menu to Disabled.
See the System Setup document for information on running the BIOS Setup program and changing
BIOS settings.
Conflicting Device Messages in Device Manager
On a TDZ 2000 equipped with the Advanced Graphics Port (AGP) version of Millennium II
graphics, you may see messages in Device Manager about conflicting devices. In the Matrox
Millennium II AGP entry, under Resources, error messages related to memory ranges used by the
PCI Standard PCI-to-PCI Bridge may display. This does not affect operation of AGP Millennium
II graphics.