Intergraph TDZ 2000 GL2 Systems Setup Manual
  1. Manuals
  2. Brands
  3. Intergraph Manuals
  4. Desktop
  5. TDZ 2000 GL2 Workstation
  6. Systems setup manual

Intergraph TDZ 2000 GL2 Systems Setup Manual

Hide thumbs Also See for TDZ 2000 GL2:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
TDZ 2000 GL2/ExtremeZ GL2
System Setup
November 1998
DHA028420

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TDZ 2000 GL2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intergraph TDZ 2000 GL2

Summary of Contents for Intergraph TDZ 2000 GL2

  • Page 1 TDZ 2000 GL2/ExtremeZ GL2 System Setup November 1998 DHA028420...
  • Page 2 Notice Information in this document is subject to change without notice and should not be considered a commitment by Intergraph Computer Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or omissions from, this document. Intergraph Computer Systems shall not be liable for incidental or consequential damages resulting from the furnishing or use of this document.
  • Page 3 Notes This device is designed and manufactured to comply with approved safety standards for information processing and business equipment. Read all operating instructions before using this device. Keep these instructions for future reference. Follow all warnings on the device or in the operating instructions.

  • Page 5: Table Of Contents

    Learning About System Ergonomics ..................x Customer Support ....................... xi Hardware and Software Support Services .............. xi World Wide Web ....................xi Intergraph Bulletin Board Service ................. xi FAXLink......................xii Telephone ......................xii More Support Options ..................xiii 1 Setting Up the Hardware ....................1 Handling the Base Unit ......................
  • Page 6 Configuring a Modem......................24 Configuring a PC Card Adapter ..................24 Changing Hard Disk Drive Letters (Windows NT) ............. 25 Changing Virtual Memory Settings (Windows NT) ............25 Getting Operating System Updates..................26 4 Operating Notes ......................27 System Power, Startup, and Shutdown ................28 Using the Standby Button..................
  • Page 7 Network..........................67 7 Reinstalling System Software ..................69 Before You Begin ......................70 System Software Products....................71 TDZ 2000 GL2 ....................71 ExtremeZ GL2 ..................... 72 Installing Windows NT Workstation 4.0 ................73 Disabling Command Queuing ................74 Enabling Bus Mastering for IDE/ATAPI Devices ..........75 Installing the Creative Labs Sound Blaster Pro 16 Driver ........
  • Page 8 viii...

  • Page 9: Preface

    Preface TDZ 2000 GL2/ExtremeZ GL2 System Setup describes setting up and configuring your TDZ 2000 GL2 or ExtremeZ GL2 system for use. This document also provides information on operating the system, troubleshooting, and reinstalling system software. If you have an ExtremeZ workstation, see the ExtremeZ Customer Welcome Letter first. The...

  • Page 10: Finding Operating System Information

    See the Late-Breaking News shipped with your system for important hardware and documentation details not covered in this document. Learning About System Ergonomics Please read the Ergonomics Guide included with your Intergraph computer system. This document provides valuable information on ways to minimize repetitive stress injuries for people working with computers.

  • Page 11: Customer Support

    On these pages, you can get news and product information, technical support information, software updates and fixes, and more. Intergraph Bulletin Board Service On the Intergraph Bulletin Board Service (IBBS), you can get technical support information, software updates and fixes, and more. To connect to the IBBS: 1.

  • Page 12: Faxlink

    In the United States, call 1-800-633-7248 between the hours of 7:00 a.m. and 7:00 p.m. Central Time, Monday through Friday (except holidays). Outside the United States, contact your local Intergraph Computer Systems subsidiary or distributor. Have the following information available when you call: Your service number, which identifies your site to Intergraph Computer Systems.

  • Page 13: More Support Options

    Visit the Support pages on the World Wide Web at http://www.intergraph.com/ics. For hardware support questions in the United States, call 1-800-763-0242. For software support questions in the United States, call 1-800-345-4856. Outside the United States, contact your local Intergraph Computer Systems subsidiary or distributor.

  • Page 15: Setting Up The Hardware

    Setting Up the Hardware Follow the instructions in this chapter to set up the hardware for your TDZ 2000 GL2 or ExtremeZ GL2 workstation. If you have an ExtremeZ workstation, see the ExtremeZ Customer Welcome Letter first. The NOTE ExtremeZ Customer Welcome Letter provides step-by-step instructions for initial setup of an ExtremeZ workstation.

  • Page 16: Handling The Base Unit

    Handling the Base Unit WARNING Do not use the bottom portion of the face panel or the lip at the top rear of the base unit as a hand hold when moving the base unit. Equipment damage and personal injury can result. Do not lift here! Do not lift...

  • Page 17: Unpacking The System

    Remove everything from the shipping cartons, then look for the following items: Workstation and power cord Keyboard and mouse Intergraph Computer Systems documentation Operating system software (CD-ROM and diskettes) and documentation Documentation for various peripheral devices A monitor with video cable, power cord, and documentation (if purchased from...

  • Page 18: Placing System Components

    NOTE If any of these items were not delivered, call the Customer Response Center immediately at 1-800-633-7248. Save the packaging materials. If you need to return equipment for repair, it must be in its original packaging for you to get warranty service. If you have already unpacked and connected the peripherals to the system, review the rest of this chapter and then go to Chapter 2, “Setting Up the Software.”...

  • Page 19: Setting Up The System

    Setting Up the System Before you connect any cables to the back of the system, note the connector locations in the following illustration. AC power connector AC voltage switch 115/230 V Mouse Keyboard Parallel Video out Mic in Line in MIDI/game Line out See the System Reference for technical details on each port.
  • Page 20 Video Out port on video display adapter card WARNING If you do not use cables supplied by Intergraph Computer Systems, you must use shielded cables to prevent excessive electromagnetic interference (EMI). Intergraph Computer Systems cables are designed to reduce the amount of EMI produced by the system.

  • Page 21: Installed Expansion Cards

    Expansion cards are installed in the Accelerated Graphics Port (AGP), Peripheral Component Interconnect (PCI), and Industry Standard Architecture (ISA) expansion slots in the base unit. If you purchased expansion cards from Intergraph Computer Systems, they are installed in specific slots as follows.

  • Page 22: Connecting Speakers And A Microphone

    Connecting an External SCSI Device Two SCSI adapters are available as options for the TDZ 2000 GL2: a dual channel Ultra Wide option, and a single channel Low-Voltage Differential (LVD) option. If your system includes one of these SCSI adapters, you can connect internal and external SCSI devices, such as hard disk drives or tape drives, to the system.

  • Page 23: Starting The System

    The total length of the SCSI cabling must not exceed the following: Drives SCSI-1 SCSI-2 Ultra 1 to 4 6 meters 3 meters 3 meters 12 meters 5 to 7 6 meters 3 meters 1.5 meters 12 meters 8 to 15 12 meters NOTE If longer Ultra SCSI cable lengths are required, Ultra SCSI mode can be disabled using...

  • Page 24: What's Next

    See Chapter 4, “Operating Notes,” for detailed information on using the Standby button. What’s Next? Intergraph Computer Systems installs the operating system through Phase I of the process. From here, continue the installation. See Chapter 2, “Setting Up the Software,” for instructions on setting up the operating system...

  • Page 25: Setting Up The Software

    Follow the instructions in this chapter to set up the operating system and associated system software on your TDZ 2000 GL2 or ExtremeZ GL2 workstation. If you are setting up an ExtremeZ workstation for the first time, see the ExtremeZ Customer NOTE Welcome Letter .

  • Page 26: Preparing For System Software Setup

    InterSite software Intergraph Computer Systems installs the operating system through Phase I of the process. You must follow the operating system Setup process to prepare Microsoft Windows NT, Microsoft Windows 95, or Windows 98 for use. Before you go through Setup, have the following documents available: Microsoft’s Start Here (for Windows NT) or Welcome to Windows 95 or Welcome to...
  • Page 27 Get and record the following information: Your name, and the name of your company or organization: For a system running Windows NT, the CD key from the Windows NT CD case, or the Product ID Number from Start Here or the registration card: For a system running Windows 95 or Windows 98, the Product ID Number from Welcome to Windows 95 or...

  • Page 28: Starting Operating System Setup

    Have several blank, formatted diskettes available to create backup diskettes containing drivers and system software. The Windows NT delivery media contain software and drivers for both Reduced Instruction Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution files, make sure you install them from the \ 386 directory (the Intel software directory) on the delivery media.

  • Page 29: Finishing System Software Setup

    Create backup diskettes of device driver software and other system software products. Get the latest driver and other system software from the World Wide Web. Learn about Intergraph Computer Systems customer support. You should take advantage of the tools provided by InterSite Welcome to ensure that your system is fully ready for use.

  • Page 30: Creating A Repair Disk

    QFE diskette for information on the applicability and installation of QFE update software on your system. See Version Manager Help for information on creating system software backup diskettes. Visit the Intergraph Computer Systems site on the World Wide Web and vendor bulletin boards for new and updated drivers.

  • Page 31: What's Next

    What’s Next? See Chapter 3, “Configuring the System,” for information on configuring the system for use.

  • Page 33: Configuring The System

    Configuring the System Follow the instructions in this chapter to configure your TDZ 2000 GL2 or ExtremeZ GL2 workstation for use. This chapter covers items required for basic operation. Configuring the Video Display................... 20 Resetting the Video Display Resolution..............20 Correcting Video Display Problems..............

  • Page 34: Configuring The Video Display

    Configuring the Video Display The first time you start the system, your monitor displays at 1024 x 768 screen resolution. For the system to use the installed video adapter at other display resolutions, you must configure the video display driver as described in this section. Open Display in the Control Panel to configure the video display driver.

  • Page 35: Correcting Video Display Problems

    5. Select a resolution appropriate for your system’s monitor, and then click OK. 6. Restart the system. Correcting Video Display Problems If the system’s video display is black, not synchronized, or distorted after you restart the system, you may have a video configuration problem. On a system running Windows NT, use the Last Known Good option to return the system to the last known good configuration recorded by Windows NT.

  • Page 36: Configuring Audio

    The monitor selection doesn’t match the multi-sync monitor attached to the system. Restart the system in VGA mode, then select a new monitor. A graphics resolution and color depth has been selected that exceeds installed display memory. Restart the system in VGA mode, then open Display in the Control Panel to reinstall and configure the display driver as described in the video display adapter documentation delivered with the system.

  • Page 37: Configuring A Cd-Recorder Drive

    See the documentation for the installed network adapter (delivered with the system) for detailed configuration instructions. See the operating system documentation and Help for information on setting up the system to use a network. Configuring a CD-Recorder Drive If you purchased a CD-Recorder (CD-R) drive with your system, it was installed before shipment.

  • Page 38: Configuring A Modem

    Configuring a Modem If you purchased a modem with your system, you must ensure the BIOS settings and modem jumpers are set appropriately, depending on which operating system and COM port you want to use with the modem. To configure the modem: 1.

  • Page 39: Changing Hard Disk Drive Letters (Windows Nt)

    Depending on your system’s configuration, you may have to reserve an interrupt request (IRQ) for a PC Card device inserted in the PC Card adapter. See Chapter 5, “Configuring the BIOS,” for information on reserving IRQs in your system’s BIOS. See the documentation delivered with the PC Card adapter or device for detailed software installation and configuration instructions.

  • Page 40: Getting Operating System Updates

    Service Packs from the Microsoft World Wide Web and FTP sites free of charge. CAUTION If Intergraph Computer Systems provides a Service Pack through the IBBS or with a product or system, it has been certified against Intergraph Computer Systems hardware as described in the announcement of its availability.

  • Page 41: Operating Notes

    Operating Notes This chapter contains important, basic information on operating your TDZ 2000 GL2 or ExtremeZ GL2 workstation. System Power, Startup, and Shutdown ................28 Using the Standby Button..................28 System Power States..................... 29 Automatic Shutdown Utility (Windows NT)............30 Starting and Shutting Down the System ...............

  • Page 42: System Power, Startup, And Shutdown

    System Power, Startup, and Shutdown When you connect the power cord from the system to an AC power outlet, auxiliary power is applied to the system. This auxiliary power is available for the system to monitor, among other things, the Standby button. Using the Standby Button The Standby button is on the front left side of the system, just below the external drive bay.

  • Page 43: System Power States

    NOTE The AMIBIOS Power Management option Power Button must be set to Suspend. If the AMIBIOS Power Management option Power Button is set to On/Off, the system will CAUTION immediately power down if the Standby button is pressed. Doing so can cause data loss and file corruption.

  • Page 44: Automatic Shutdown Utility (Windows Nt)

    Standby button to restart the system. Automatic Shutdown Utility (Windows NT) The Intergraph Automatic Shutdown Utility for Windows NT allows you to select among various shutdown options. This utility provides additional options over the standard shutdown options available from the operating system Start menu. To access Help for this utility, from the operating system Start menu, click Programs, click Automatic Shutdown Utility, and then click Automatic Shutdown Help.
  • Page 45 NOTE Intergraph strongly suggests that you use this option to shut down your computer. If you use the Shutdown the Computer option, the system will not power down until you press and hold the Standby button for 4 seconds.

  • Page 46: Starting And Shutting Down The System

    Time Remaining: Configures the amount of time provided before the selected shutdown option occurs. When the Shutdown utility is started, this timer begins counting down. Press Enter or click the Stop Shutdown button to stop the countdown timer. Apply: Makes your selected changes without closing the Shutdown dialog. Use this button to select a different shutdown option, or to change the countdown timer.

  • Page 47: Observing Operating Precautions

    To log off, restart, or shut down Windows 95 or Windows 98: 1. Select Shut Down from the Start menu. 2. Perform one of the following steps, as appropriate: To log off the operating system, select the “Close all programs” option (if given), and then select OK.
  • Page 48 Some keyboard keys have special functions, as follows: Function Usually assigned to an application-specific function; often used to exit. Depending on the application in use, prints the displayed screen to a PRINT SCRN printer. Prevents the screen from scrolling. SCROLL LOCK Temporarily suspends screen scrolling or some operations.

  • Page 49: Using The Mouse

    Using the Mouse The system’s mouse is a PS/2-compatible tracking device that controls the movement and positioning of the pointer (or cursor) displayed on the screen in a graphical display environment. The basic techniques for using the mouse are as follows: Action Description Point...

  • Page 50: Using The Cd-Rom Drive

    protect opening is uncovered, the disk can be read from, but not written to. To write data to a diskette, ensure the write-protect opening is covered. Using the CD-ROM Drive The system’s CD-ROM drive occupies a 5.25-inch peripheral device bay, and is accessible through a tray or a slot at the front of the base unit.

  • Page 51: Updating An Emergency Repair Disk Or A Startup Diskette

    See Chapter 2, “Setting Up the Software,” for more information on these programs. Systems running Windows NT ship with the following InterSite programs: InterSite Manager, the common starting point for all the InterSite products. This utility integrates InterSite components by centralizing them in an easy-to-use point-and-click display.

  • Page 52: Ensuring Pc Card Support And Operation (Windows Nt)

    was installed), along with the standard operating system drivers. Use the Startup diskette to start the system in the event you have trouble starting Windows 95 or Windows 98. See the operating system documentation for more information. Ensuring PC Card Support and Operation (Windows NT) The optional PC Card adapter is used with devices based on standards developed by the Personal Computer Memory Card International Association (PCMCIA).

  • Page 53: Using Hardware Security Features

    To boot from an external SCSI disk drive: 1. Disconnect any IDE or EIDE disk drives from the primary and secondary IDE controllers. The system’s BIOS will not accept a mixture of SCSI and IDE/EIDE devices if the boot device is a SCSI disk drive. 2.

  • Page 54: Finding Serial And Model Numbers

    Finding Serial and Model Numbers The system’s serial number and model number are on a label affixed on the right side (as viewed from the front). Cleaning the System CAUTION Turn off power to the system before cleaning the exterior surfaces, the mouse, or the keyboard.

  • Page 55: Configuring The Bios

    Configuring the BIOS This chapter documents the setup parameters of the system’s basic input/output system (BIOS). Introduction ........................42 Standard CMOS Setup ....................... 43 Advanced CMOS Setup ..................... 44 Advanced Chipset Setup ....................48 Power Management Setup....................52 PCI/Plug and Play Setup ....................55 Peripheral Setup ........................

  • Page 56: Introduction

    Introduction The system’s basic input/output system (BIOS) records basic system operating parameters, such as the amount of memory, the boot sequence, and the type of video display. The operating parameters are set in the BIOS before shipment. The BIOS is stored in flash erasable-programmable memory (EPROM) on the system board, and reads the system parameters in the system’s complementary metal-oxide semiconductor (CMOS) random- access memory (RAM).

  • Page 57: Standard Cmos Setup

    Standard CMOS Setup Date (mm/dd/yyyy), Time (hh/mm/ss) To set the system date and time, use to move the prompt and select a field (hours, minutes, or seconds). Use the plus key (+) to increase the number; use the minus key ( -) to decrease the number.

  • Page 58: Advanced Cmos Setup

    Parameter Description PIO Mode Sets the transfer speed. The slowest speed is PIO Mode 0; the fastest speed is PIO Mode 5, or Ultra DMA mode. 32 Bit Mode Toggles 32 bit transfer mode. Sectors The number of sectors per cylinder. MFM drives have 17 sectors per track.

  • Page 59: St Boot Device

    Pri (Master/Slave) ARMD Emulated as Sec (Master/Slave) ARMD Emulated as The settings are Auto, Floppy, and Hard Disk. The Optimal default setting is Auto. 1st Boot Device This option sets the type of device for the second boot drives that the BIOS attempts to boot from after POST completes.

  • Page 60: Primary Display

    S.M.A.R.T. For Hard Disks Set this option to Enabled to permit the BIOS to use the SMART (System Management and Reporting Technologies) protocol for reporting server system information over a network. The settings are Enabled and Disabled. The Optimal default setting is Enabled. BootUp Num Lock Set this option to Off to turn the Num Lock key off when the computer is booted so you can use the arrow keys on both the numeric keypad and the keyboard.

  • Page 61: System Bios Cacheable

    System BIOS Cacheable When set to Enabled, the contents of the F0000h system memory segment can be read from and written to cache memory. The contents of this memory segment are always copied from the BIOS ROM to system RAM for faster execution. The settings are Enabled and Disabled. The Optimal default setting is Enabled.

  • Page 62: Advanced Chipset Setup

    Setting Description Cached The contents of the video ROM area from C0000h - C7FFFh are copied from ROM to RAM and can be written to or read from cache memory. Enabled The contents of the video ROM area from C0000h - C7FFFh are copied (shadowed) from ROM to RAM for faster execution.

  • Page 63: Memory Hole

    USWC Write Post Set this option to Enabled to allow write operations from USWC memory to be posted. The settings are Enabled and Disabled. The Optimal default setting is Enabled. Master Latency Timer (Clks) The settings are Disabled, 32, 64, 96, 128, 160, 192, and 224. The Optimal default setting is Multi-Trans Timer (Clks) The settings are Disabled, 32, 64, 96, 128, 160, 192, and 224.

  • Page 64: Graphics Aperture Size

    SDRAM RAS# to CAS# delay The settings are 3 SCLKs, 2 SCLKs, and Auto. The Optimal default setting is 3 SCLKs. SDRAM RAS# Precharge The settings are 3 SCLKs, 2 SCLKs, and Auto. The Optimal default setting is 3 SCLKs. Power Down SDRAM The Optimal default setting is Enabled.
  • Page 65 AGP SERR The Optimal default setting is Disabled. AGP Parity Error Response The Optimal default setting is Disabled. 8bit I/O Recovery Time The Optimal default setting is Disabled. 16bit I/O Recovery Time The Optimal default setting is Disabled. PIIX4 SERR# The Optimal default setting is Disabled.

  • Page 66: Power Management Setup

    DMA-# Type The settings are Normal ISA, PC/PCI, and Distributed. The Optimal default setting is Normal ISA. CPU Bus Frequency The settings are Auto, 66.8 MHz, 68.5 MHz, 75 MHz, 83.3 MHz, 100 MHz, 103 MHz, and 112 MHz. The Optimal default setting is Auto. Power Management Setup The BIOS Setup options described in this section are selected by choosing Power Management Setup from the BIOS Setup main menu.
  • Page 67 Hard Disk Power Down Mode This option specifies the power conserving state that the hard disk drive enters after the specified period of hard drive inactivity has expired. The settings are Disabled, Standby, and Suspend. The Optimal default setting is Suspend. Hard Disk Timeout (Minute) This option specifies the length of a period of hard disk drive inactivity.
  • Page 68 Display Activity When set to Monitor, this option enables event monitoring on the video display. If set to Monitor and the computer is in a power saving state, the BIOS watches for display activity. The computer enters the Full On state if any activity occurs. The BIOS reloads the Standby and Suspend timeout timers if display activity occurs.

  • Page 69: Pci/Plug And Play Setup

    Minute The Optimal default setting is N/A. PCI/Plug and Play Setup Plug and Play Aware O/S Set this option to Yes to inform the BIOS that the operating system can handle plug and Play (PnP) devices. The settings are No and Yes. The Optimal default setting is No. PCI Latency Timer (PCI Clocks) This option specifies the latency timings (in PCI clocks) for PCI devices installed in the PCI expansion slots.

  • Page 70: Pci Ide Busmaster

    PCI IDE BusMaster Set this option to Enabled to specify that the IDE controller on the PCI bus has bus mastering capability. The settings are Disabled and Enabled. The Optimal default setting is Enabled. Offboard PCI IDE Card This option specifies if an offboard PCI IDE controller adapter card is used in the computer. You must also specify the PCI expansion slot on the motherboard where the offboard PCI IDE controller card is installed.

  • Page 71: Peripheral Setup

    Reserved Memory Address This option specifies the beginning address (in hex) of the reserved memory area. The specified ROM memory area is reserved for use by legacy ISA adapter cards. This option is disabled if the Reserved Memory Size option is set to Disabled. The Optimal default setting is C8000.

  • Page 72: Onboard Parallel Port

    Serial Port2 Mode This option specifies the operating mode for serial port 2. This option only appears if the Onboard Serial Port2 option is not set to Disabled. The settings are IrDA (Infrared Dealer’s Association protocol), Sharp-IR, Consumer, and Normal. The Optimal default setting is Normal.

  • Page 73: Auto-Detect Hard Disks

    Parallel Port IRQ The settings are 5 and 7. The Optimal default setting is 7. Parallel Port DMA Channel The Optimal default setting is N/A. Onboard IDE This option specifies the IDE channel used by the on-board IDE controller. The settings are Disabled, Primary, Secondary, and Both.

  • Page 74: Auto Configuration With Fail-Safe Settings

    Updating the System BIOS For information on updating the system’s BIOS, see the file delivered with the README FLASHUTIL2M system software product, which is available from the online services of Intergraph Computer Systems. See the Preface for information on locating the online services.

  • Page 75: Troubleshooting

    Troubleshooting Use this chapter to help identify the causes of problems that may occur on a TDZ 2000 GL2 or ExtremeZ GL2 workstation. See the System Reference for information on opening the case and working with internal components. If you cannot resolve the problem or if the instructions direct you to call the Customer Response Center, contact Intergraph Computer Systems.

  • Page 76: System Power

    System Power Fails to power on: Reason Solution Power cord not connected properly. Verify that the power cord is properly connected to the power receptacle. Power not available at the outlet. Verify power to the outlet has not been interrupted. Test the outlet with a known working appliance.
  • Page 77 Does not boot from the expected boot device: Reason Solution Operating system not on the system drive. Install the operating system as described in Chapter 7. BIOS attempts to boot from the wrong hard Ensure the SCSI adapter for the system disk drive.
  • Page 78 Message Explanation and Solution Processor Exception Interrupt The CPU generated an exception interrupt. Call the Customer Response Center. Display Memory Read/Write Error The video adapter is faulty. Call the Customer Response Center. ROM Checksum Error The ROM checksum value does not match the value encoded in the BIOS.

  • Page 79: Sound

    “Invalid configuration information for SLOT XX” message displays: Reason Solution System is not properly configured to Use the Chipset menu parameters in BIOS recognize the new ISA option board. Setup to reserve system resources for the board. See Chapter 5. Total amount of memory does not display: Reason Solution...

  • Page 80: Video

    Video System powered on, but screen remains blank: Reason Solution Monitor not powered on. Turn on power to the monitor. Monitor power cord not connected. Connect monitor power cord to AC outlet and monitor. Video cable not properly installed. Ensure video cable is connected to monitor and case.

  • Page 81: Network

    Network Cannot connect to other systems on LAN: Reason Solution Network cable disconnected. Reconnect network cable and ensure proper connection. If cable is properly connected, notify your System Administrator. Incorrect software configuration. Notify your System Administrator. Cannot plot to network printer or plotter on LAN: Reason Solution Network cable disconnected.

  • Page 83: Reinstalling System Software

    Follow the instructions in this chapter only if you need to reinstall the operating system and associated system software on your TDZ 2000 GL2 or ExtremeZ GL2 workstation. Before you reinstall the software, ensure that you read and understand this entire chapter.

  • Page 84: Before You Begin

    CD-ROM. Driver software is routinely improved and updated. Use InterSite Version Manager, or visit Intergraph Computer Systems on the World Wide Web and vendor bulletin boards for new and updated drivers. Review the Late-Breaking News document delivered with your system for any additional...

  • Page 85: System Software Products

    The following table lists drivers and other system software products installed on various configurations of TDZ 2000 GL2 systems. Products available for your system, but not listed here, are available on an operating system software CD-ROM or are delivered with an expansion card or additional peripheral device.

  • Page 86: Extremez Gl2

    Description Windows NT 4.0 Windows 95/98 Automatic Shutdown Utility SHUTDOWN IE 4.01 Settings file IE4SETTINGS Windows 95 Boot Diskette W95BOOTDSK Windows 98 Boot Diskette BOOTW98 Quick-Fix Engineering Update QFE_NT* QFE_W* BIOS and Flash Program Utility FLASHUTIL2M FLASHUTIL2M (available via online services) ExtremeZ GL2 If you have an ExtremeZ system, it was shipped with the Drivers and Applications product on the Connectivity Plus CD-ROM.

  • Page 87: Installing Windows Nt Workstation 4.0

    Installing Windows NT Workstation 4.0 Depending on your system’s configuration, you will need some or all of the following system software during the installation process: SCSI adapter driver Video display adapter driver Network adapter driver Sound adapter driver QFE update software NOTE If you want to boot from a SCSI hard disk drive, you must change the 2nd Boot Device option in AMIBIOS Setup from 1st IDE-HDD to SCSI.

  • Page 88: Disabling Command Queuing

    operating system CD-ROM. Alternatively, you can install the drivers or other system software from the Windows NT CD-ROM if you do not have them on diskette. Perform any additional installation and configuration tasks described in the Late- Breaking News document delivered with your system. Configure the system as described in Chapter 3, “Configuring the System.”...

  • Page 89: Enabling Bus Mastering For Ide/Atapi Devices

    6. From the Edit menu, select Add Value. 7. Type DisableTaggedQueuing into the Value Name box. 8. Select REG_DWORD for the Data Type, and then select OK. 9. Type 1 into the Data box. 10. Set the Radix value to Hex, and then select OK. 11.

  • Page 90: Installing Windows 95 Or Windows 98

    Installing Windows 95 or Windows 98 Depending on your system’s configuration, you will need some or all of the following system software during the installation process: Windows 95/98 Operating System CD-ROM SCSI adapter driver Video display adapter driver Network adapter driver Sound card driver Mouse driver When reinstalling Windows 95 or Windows 98, you must also reinstall various system...

  • Page 91: Installing The Creative Labs Sound Blaster Pro 16 Driver

    Configure the system as described in Chapter 3, “Configuring the System.” Perform any operational changes required for your system as described in Chapter 4, “Operating Notes.” You can install MS-DOS Microstation drivers, available from the Intergraph Bulletin Board Service (IBBS). Installing the Creative Labs Sound Blaster Pro 16 Driver To install the Sound Blaster Pro 16 adapter driver, use the Plug and Play feature of Windows 95/98 to install the driver.

  • Page 92: Installing Windows 95 Or Windows 98 With An Installed Network Adapter

    Installing Windows 95 or Windows 98 with an Installed Network Adapter If you reinstall Windows 95 or Windows 98 on a system with an installed network adapter, the adapter may not function after completing Setup. To re-enable network adapter operation after installing Windows 95 or Windows 98: 1.

  • Page 93: Disabling The Active Desktop

    CAUTION If Intergraph provides a Service Pack or Service Release through the IBBS or with a product or system, it has been certified against Intergraph hardware as described in the announcement of its availability. If you obtain a Service Pack or Service Release from any...

  • Page 95: Using System Resources

    The chapter covers specific Peripheral Component Interconnect (PCI) and Industry Standard Architecture (ISA) devices offered by Intergraph as system options. Intergraph Computer Systems has determined that the devices discussed in this chapter require specific resource settings to ensure proper system operation.

  • Page 96: System Resources

    System Resources The following sections list the available system resources. See the vendor documentation delivered with an expansion card or a peripheral device for instructions on how to use these resources. ISA Bus Interrupt (IRQ) Assignments Assignment Assignment Reserved (timer/counter) Reserved (real-time clock) Reserved (keyboard controller) USB or Windows Sound...
  • Page 97 I/O Address (hex) Size Assignment 0064 1 byte Keyboard controller 0070 bit7 1 bit Enable NMI 0070 bit0:6 7 bits RTC address (max. 128 bytes) 0071 1 byte RTC data byte 0080 – 008F 16 bytes DMA page registers 00A0 – 00A1 2 bytes Interrupt controller 2 00C0 –...

  • Page 98: Memory Addresses

    I/O Address (hex) Size Assignment 03F7 bit0:6 read 7 bits Primary IDE channel status 03F8 – 03FF 8 bytes COM 1 0CF8 – 0CFB 4 bytes PCI configuration address registers (DW access) 0CFC – 0CFF 4 bytes PCI configuration data registers FF00 –...

  • Page 99: Using System Resources

    Using System Resources Most ISA devices installed in the system require you to reserve an IRQ. PCI devices also need to use an IRQ, but since they share system resources they can use the same IRQ. At least one IRQ must be left unassigned, for use with any PCI devices installed in your system. The system has a limited number of open IRQs.

  • Page 100: Pci Devices

    PCI Devices The system’s PCI expansion slots comply with the PCI 2.1 specification. Devices that comply with the PCI 2.1 specification are fully plug-and-play. You do not have to configure them after installation. Some older PCI device drivers cannot share an interrupt, which is a violation of the PCI 2.1 specification.

  • Page 101: Returned Goods Authorization (Rga) Form

    Mail Address Reason for Return NOTE All returned equipment MUST be shipped in original Intergraph packaging to obtain warranty service. WARNING Back up disk drives before returning equipment. Intergraph is not responsible for data lost in shipping or repair process.

  • Page 102: Warranty Procedure

    Warranty Procedure Some malfunctioning equipment cannot be repaired in the field, and you must return it to Intergraph for repair. Follow these steps to obtain a Returned Goods Authorization (RGA) log number and return the malfunctioning equipment. 1. Determine the serial number of the system. The serial number is located on the white bar code identification label on the back of the base unit.
  • Page 103 Repair Depot RGA No. ________________________ Intergraph Corporation 9805 Kellner Road Huntsville AL 35894 Repair Depot RGA No. ________________________ Intergraph Corporation 9805 Kellner Road Huntsville AL 35894 Repair Depot RGA No. ________________________ Intergraph Corporation 9805 Kellner Road Huntsville AL 35894...

This manual is also suitable for:

Extremez gl2

Table of Contents