Table 16-2 Eoa Interface: Add - ZyXEL Communications Prestige 623 series User Manual

Prestige 623 Series Dual-link ADSL Router
FIELD
EOA Interface Select a predefined interface name from the drop-down list.
Interface Sec Select the level of IP filter rule to be applied to from the drop-down list.
Type
Lower Interface Select the interface name over which this protocol is being configured from the drop-
down list. Typically, an EOA interface is configured to operate over an aal5 interface,
such as aal5-0.
Conf. IP If you are using the Prestige as a router on your LAN, enter the IP address for the
Address interface.
You do not have to enter the IP address if you are using the Prestige as a bridge or when
your Prestige gets the IP address from your ISP automatically.
Netmask If you are using the Prestige as a router on your LAN, enter the network mask for the
interface.
You do not have to enter the network mask if you are using the Prestige as a bridge.
Use DHCP Select Enable to get an IP address from a DHCP server.
Default Route Select Enable to set a default route through your Prestige for your LAN to access the
Internet.
Gateway Enter the IP address of the gateway device.
Address
Click Submit to confirm your changes. Refer to the section on Committing Your Changes and Rebooting the
Prestige to save your changes to permanent memory and make your changes take effect.
16-4

Table 16-2 EOA Interface: Add

DESCRIPTION
Configuring EOA Interfaces