The following table describes the fields in this screen.
FIELD
Bridging
Select Enable to activate bridge mode on the Prestige.
Select Enable to allow WAN to WAN bridging. This is the default setting.
WAN to WAN
Bridging
Activating WAN to WAN bridging may not be desirable in situations where security or
bandwidth is a major concern.
ZIPB
Select Enable to activate the Zero Installation PPPoE Bridge (ZIPB) mode so your ISP
does not have to install a PPPoE client on your computer(s). Further more, you don't
have to set up NAT (Network Address Translation) on the Prestige. ZIPB combines the
advantages of routing and bridging modes.
Configuring Bridging
Figure 17-1 Bridge Configuration
Table 17-1 Bridge Configuration
Prestige 623 Series Dual-link ADSL Router
DESCRIPTION
17-3