1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Network Router
  5. Prestige 623R-T
  6. Quick start manual

ZyXEL Communications Prestige 623R-T Quick Start Manual

Zyxel prestige 600 series adsl dual-link router
Hide thumbs Also See for Prestige 623R-T:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Prestige 623R-T
ADSL Dual-link Router

Quick Start Guide

Version 3.40
February 2004

Advertisement

Table of Contents
loading

Related Manuals for ZyXEL Communications Prestige 623R-T

Summary of Contents for ZyXEL Communications Prestige 623R-T

  • Page 1: Quick Start Guide

    Prestige 623R-T ADSL Dual-link Router Quick Start Guide Version 3.40 February 2004...

  • Page 2: Introducing The Prestige

    Prestige 623R-T ADSL Dual-link Router Introducing the Prestige The Prestige 623R-T ADSL Dual-link Router is the ideal all-in-one device for small networks connecting to the Internet via ADSL. See your User’s Guide for more details on all Prestige features. You should have an Internet account already set up and have been given most of the following information.

  • Page 3: Hardware Connection

    Prestige 623R-T ADSL Dual-link Router Hardware Connection Rear Panel Connections PORT CONNECTION Connect to a telephone jack using a telephone wire. Use an Ethernet cable to connect to a computer for initial 10/100M configuration. The port is auto-negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically adjust to the type of Ethernet cable you use (straight-through or crossover)).

  • Page 4: Front Panel Leds

    Prestige 623R-T ADSL Dual-link Router PORT CONNECTION The USB port is useful if you have a USB-enabled computer that does not have a network interface card for attaching to your Ethernet network. Refer to the Installing the USB Driver section.

  • Page 5: Installing The Usb Driver

    Prestige 623R-T ADSL Dual-link Router Installing the USB Driver System Requirement • Windows 98 SE/Me/2000/XP • An available USB port DO NOT connect the USB port at this point. Follow the steps for your version of operating system to install the USB driver.
  • Page 6 Prestige 623R-T ADSL Dual-link Router Click Yes to agree to the license agreement. Select the setup type (Typical is recommended) and click Next.
  • Page 7 Prestige 623R-T ADSL Dual-link Router When a Start Copying Files screen displays, click Next to continue. Click OK and restart the computer when prompted to complete the installation. Plug the square end of the USB cable into the back of your Prestige and then plug the rectangular end of the USB cable into the back of your computer.

  • Page 8: For Windows 2000/Xp

    Prestige 623R-T ADSL Dual-link Router For Windows 2000/XP Screen shots for Windows XP are shown. Save your work and close all other Windows applications. Insert the included CD, the CD auto runs and the main screen displays. Double-click Install Driver on the main screen.
  • Page 9 Prestige 623R-T ADSL Dual-link Router Select the setup type (Typical is recommended) and click Next. When a Start Copying Files screen displays, click Next to continue.
  • Page 10 Prestige 623R-T ADSL Dual-link Router Connect the USB port to the computer when prompted. A window displays briefly, indicating that the system has found a new hardware. Click Finish and restart the computer when prompted to complete the installation.

  • Page 11: Verifying Your Usb Installation

    Prestige 623R-T ADSL Dual-link Router Verifying Your USB Installation When your computer finishes rebooting, check the status of the Prestige in the Device Manager window. Click Start, Settings, Control Panel, System, Hardware and then click Device Manager. (Steps may vary depending on the version of Windows).
  • Page 12 Prestige 623R-T ADSL Dual-link Router In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties. Click the IP Address tab. -If your IP address is dynamic, select Obtain an IP address automatically. -If you have a static IP address, select...
  • Page 13 Prestige 623R-T ADSL Dual-link Router Click the DNS Configuration tab. -If you do not know your DNS information, select Disable DNS. -If you know your DNS information, select Enable DNS and type the information in the fields below (you may not need to fill them all in).
  • Page 14 Prestige 623R-T ADSL Dual-link Router Verifying Your Computer’s IP Address Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. Select your network adapter. You should see your computer's IP address, subnet mask and default gateway.

  • Page 15: Checking/Updating Your Computer's Ip Address

    Prestige 623R-T ADSL Dual-link Router Remove any previously installed gateways in the IP Settings tab and click OK to go back to the Internet Protocol TCP/IP Properties screen. Click Obtain DNS server address automatically if you do not know your DNS server IP address(es).

  • Page 16: Configuring Your Prestige

    Prestige 623R-T ADSL Dual-link Router Press ENTER. You should see the reply messages displayed as shown. Your computer can now communicate with the Prestige using the LAN or the USB port. C:\>ping 192.168.1.1 Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 time=10ms TTL=254...
  • Page 17 Prestige 623R-T ADSL Dual-link Router Default user name. You should now see the web configurator Site Map screen. • Click Wizard Setup to begin a series of screens to configure your Prestige for the first time. • Click a link under Advanced Setup to configure advanced Prestige features.

  • Page 18: Internet Access Using The Wizard

    Prestige 623R-T ADSL Dual-link Router The Prestige automatically times out after five minutes of inactivity. Simply log back into the Prestige if this happens to you. Internet Access Using the Wizard Use the Wizard Setup screens to configure your system for Internet access settings and fill in the fields with the information in the Internet Account Information table.

  • Page 19: Bridge Mode

    Prestige 623R-T ADSL Dual-link Router If your ISP provides the name of your PPPoE service provider, enter it in the Service Name field. Enter the user name and password exactly as your ISP assigned them. Select Obtain an IP Address Automatically if you have a dynamic IP address;...
  • Page 20 Prestige 623R-T ADSL Dual-link Router In the ENET ENCAP Gateway field, enter the gateway IP address given by your ISP. Refer to Figure 2 for other field descriptions. Figure 4 Internet Connection with ENET ENCAP Refer to Figure 2 for field descriptions.
  • Page 21 Prestige 623R-T ADSL Dual-link Router Verify the settings in the screen shown next. To change the LAN information on the Prestige, click Change LAN Configurations. Otherwise click Save Settings to save the configuration and skip to step 5. Figure 6 Wizard Screen 3 If you want to change your Prestige LAN settings, click Change LAN Configuration to display the screen as shown next.
  • Page 22 Prestige 623R-T ADSL Dual-link Router Enter the IP address of your Prestige in dotted decimal notation in the LAN IP Address field. For example, 192.168.1.1 (factory default). If you change the Prestige’s LAN IP address, you must use the new IP address if you want to access the web configurator again.

  • Page 23: Test Your Internet Connection

    Prestige 623R-T ADSL Dual-link Router Figure 8 Wizard Screen 4 Test Your Internet Connection Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning. Refer to the User’s Guide for more detailed information on the complete range of Prestige features.

  • Page 24: Troubleshooting

    Prestige 623R-T ADSL Dual-link Router Troubleshooting PROBLEM CORRECTIVE ACTION The PWR and/or Make sure the Prestige is connected to the correct power adaptor, SYS LEDs are the power adaptor is plugged into an adequate power supply and off. the Prestige power switch is turned on.
  • Page 25 Prestige 623R-T ADSL Dual-link Router PROBLEM CORRECTIVE ACTION I cannot access The default user name is “admin” and the default password is the web “1234”. If you have changed the password and have forgotten, you configurator. need to reset the Prestige. See User’s Guide.

Table of Contents