Table 3-3 Quick Configuration - ZyXEL Communications Prestige 623 series User Manual

FIELD
ATM Interface
Operation Mode
Encapsulation
VPI/ VCI
Bridge
IGMP
IP Address and
Subnet Mask
Default Route
Gateway IP Address
PPP
Username
Password
Use DNS
DNS
Getting Started with the Web Configurator

Table 3-3 Quick Configuration

Select an ATM interface from the drop-down list menu.
Select Enabled from the drop-down list menu to set the Prestige to provide routing
function and act as an Internet gateway for your LAN.
Otherwise select Disabled.
Select the encapsulation method your ISP uses from the drop-down list menu. See
chapter on Configuring the ATM VCC.
NOTE: If you select IPoA (starts with 1483) encapsulation types, you must configure
the default gateway and default route in the IPoA Configuration page. See chapter
on Configuring IPoA Interfaces.
Enter the unique data path your modem uses to communicate with your ISP. See
chapter on Configuring the ATM VCC.
Select Enabled from the drop-down list menu to activate bridging between your
Prestige and ISP. Otherwise select Disabled.
Your ISP may also refer to this using "RFC 1483" or "Ethernet over ATM". See
chapter on bridging for more information.
Depending on your ISP, select Enabled from the drop-down list menu to activate
IGMP (Internet Group Management Protocol) which some ISPs may use to perform
remote configuration on your Prestige. Otherwise select Disabled.
If your ISP given a public IP address to you, enter the IP address and the associated
subnet mask in the fields provided.
Select Enabled from the drop-down list menu to set the IP address specified above
as the default route for your LAN.
Otherwise select Disabled. This is the default setting.
Enter the IP address of the default gateway (or your ISP server).
Enter the username provided by your ISP. (Note: this is not the same as the user
name and password you used to log in to Configuration Manager.)
Enter the password associated with the username above.
Select Enable if your ISP provides you with DNS (Domain Name Service)
information. Otherwise, select Disable.
Prestige 623 Series Dual-link ADSL Router
DESCRIPTION
3-7