Figure 2-7 Usb Computer: Ip Setup - ZyXEL Communications Prestige 623 series User Manual

Prestige 623 Series Dual-link ADSL Router
You must configure the USB computer so that its IP properties place it on the same subnet as the Prestige's
USB port. There are two ways to do this:
Use the DHCP Server feature on the Prestige to assign IP address dynamically to your
USB computer
Assign a static IP address to you USB computer.
Follow the steps to set up your USB computer's IP address. Windows 2000 screen shots are shown. Steps
and screen shots may vary depending on the version of Windows.
Step 1. Click Start, Control Panel and Network and Dial-up Connections. the icon that corresponds
to your new USB connection (not the one that corresponds to your Ethernet NIC).
Step 2. Right-click on the icon that corresponds to your new USB connection (not the one that
corresponds to your Ethernet NIC) and select Properties.
Step 3. In the Properties screen, make sure the Connect Using field displays "ZyXEL USB LAN
Modem #n" (where n is a number).
2-8

Figure 2-7 USB Computer: IP Setup

Hardware Installation and Initial Setup