Prestige 623 Series Dual-link ADSL Router
Your Prestige may already be pre-configured with the necessary ATM VC interface
properties, or the screen may contain placeholder values that you must change
before using the Prestige. Only change these values if your ISP gives you
To delete an ATM interface, click
12.3 Adding and Changing ATM Properties
You may need to change the ATM VC properties if your ISP provides settings that differ from those that
were pre-configured. To change the properties associated with a VCC interface, you must delete the VC
interface, and then add a new interface of the same name with new settings.
You may need to create more than one VC interface if you use multiple services with your ISP.
Before creating a new VC interface, make sure you have the following information from your ISP or
telephone company:
•
VPI
•
VCI
•
Mux Type: (LLC or VC)
In the ATM VCC Configuration screen, click Add. The ATM VC – Add screen displays.
The following table describes the fields in this screen.
12-2
different ones.
in the Action column.
Figure 12-2 ATM VC: Add
Configuring the ATM