Log And Trace; Viewing Error Log; Figure 17-6 Menu 24.3 System Maintenance : Log And Trace; Figure 17-7 Sample Error And Information Messages - ZyXEL Communications ZyAIR G-500 User Manual

17.4 Log and Trace

Your ZyAIR provides the error logs and trace records that are stored locally.

17.4.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error log. Follow the
procedures to view the local error/trace log:
Step 1. Type 24 in the main menu to display Menu 24 – System Maintenance.
Step 2. From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.

Figure 17-6 Menu 24.3 System Maintenance : Log and Trace

Step 3. Enter 1 from Menu 24.3 – System Maintenance – Log and Trace and press [ENTER] twice to
display the error log in the system.
After the ZyAIR finishes displaying the error log, you will have the option to clear it. Samples of typical
error and information messages are presented in the next figure.
51 Sat Jan
52 Sat Jan
53 Sat Jan
54 Sat Jan
55 Sat Jan
56 Sat Jan
57 Sat Jan
58 Sat Jan
59 Sat Jan
60 Sat Jan
61 Sat Jan
62 Sat Jan
63 Sat Jan
Clear Error Log (y/n):
System Information and Diagnosis
Menu 24.3 - System Maintenance - Log and Trace
1. View Error Log
Please enter selection:
1 00:00:00 2000 PINI
1 00:00:02 2000 PP05 -WARN
1 00:00:30 2000 PSSV -WARN
1 00:04:33 2000 PINI
1 00:04:39 2000 PINI -WARN
1 00:04:39 2000 PP07
1 00:04:39 2000 PINI
1 00:04:39 2000 PINI
1 00:04:41 2000 PP05 -WARN
1 00:05:09 2000 PSSV -WARN
1 00:05:09 2000 PSSV -WARN
1 00:06:11 2000 PP09
1 00:06:11 2000 PINI

Figure 17-7 Sample Error and Information Messages

ZyAIR G-500 Wireless Access Point User's Guide
INFO main: init completed
SNMP TRAP 3: link up
SNMP TRAP 0: cold start
INFO SMT Session Begin
SNMP TRAP 6: System reboot by user!
INFO LAN promiscuous mode <1>
INFO Last errorlog repeat 1 Times
INFO main: init completed
SNMP TRAP 3: link up
Last errorlog repeat 1 Times
SNMP TRAP 0: cold start
INFO SMT Password pass
INFO SMT Session Begin
17-5