Table of Contents
Advertisement
8.1
Remote Management Overview
Remote management allows you to determine which services/protocols can access which ZyAIR interface (if
any) from which computers. You can customize the service port, access interface and the secured client IP
address to enhance security and flexibility.
You may manage your ZyAIR from a remote location via:
To disable remote management of a service, select Disable in the corresponding Server Access field.
You may only have one remote management session running at a time. The ZyAIR automatically disconnects
a remote management session of lower priority when another remote management session of higher priority
starts. The priorities for the different types of remote management sessions are as follows.
1. Console port
2. Telnet
3. HTTP
8.1.1 Remote Management Limitations
Remote management over LAN or WLAN will not work when:
1. You have disabled that service in one of the remote management screens.
2. The IP address in the Secured Client IP Address field does not match the client IP address. If it
does not match, the ZyAIR will disconnect the session immediately.
3. There is already another remote management session with an equal or higher priority running. You
may only have one remote management session running at one time.
8.1.2 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The ZyAIR
automatically logs you out if the management session remains idle for longer than this timeout period. The
management session does not time out when a statistics screen is polling. You can change the timeout period
in the System screen.
Remote Management
This chapter provides information on the Remote Management screens.
WLAN only,
LAN only,
ZyAIR G-500 Wireless Access Point User's Guide
Remote Management
ALL (LAN and WLAN),
Neither (Disable).
Chapter 8
8-1
Advertisement
Table of Contents
