Displaying Logs; Log Command Example - ZyXEL Communications ZyAIR G-500 User Manual

ZyAIR B-500 Wireless Access Point User's Guide
LOG CATEGORIES
8021x
access
error
icmp
mten
packetfilter
remote
tcpreset
0
Use to not record logs for that category,
alerts for that category, and
Use the sys logs save command to store the settings in the ZyAIR (you must do this in order to
record logs).
Use the sys logs display command to show all of the logs in the ZyAIR's log.
Use the sys logs category display command to show the log settings for all of the log
categories.
Use the sys logs display [log category] command to show the logs in an individual ZyAIR
log category.
Use the sys logs clear command to erase all of the ZyAIR's logs.

Log Command Example

This example shows how to set the ZyAIR to record the error logs and alerts and then view the results.
ras> sys logs load
ras> sys logs category error 3
ras> sys logs save
ras> sys logs display access
I-4
Chart I-4 Log Categories and Available Settings
3
to record both logs and alerts for that category.

Displaying Logs

AVAILABLE PARAMETERS
0, 1
0, 1, 2, 3
0, 1, 2, 3
0, 1
0, 1
0, 1
0, 1
0, 1
1
to record only logs for that category,
2
to record only
Log Descriptions