Table of Contents
Advertisement
LABEL
Trusted Host
If you enter a trusted host, your ZyAIR will only respond to SNMP messages from this
address. A blank (default) field means your ZyAIR will respond to all SNMP messages
it receives, regardless of source.
Trap
Community
Type the trap community, which is the password sent with each trap to the SNMP
manager.
Destination
Type the IP address of the station to send your SNMP traps to.
SNMP
Service Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Service Access
Select the interface(s) through which a computer may access the ZyAIR using this
service.
Secured Client
A secured client is a "trusted" computer that is allowed to communicate with the ZyAIR
IP Address
using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
Apply
Click Apply to save your changes back to the ZyAIR.
Reset
Click Reset to begin configuring this screen afresh.
Remote Management
ZyAIR G-500 Wireless Access Point User's Guide
Table 8-6 SNMP
DESCRIPTION
8-9
Advertisement
Table of Contents
