Table of Contents
Advertisement
6.
-If you do not know your gateway's IP address,
remove any previously installed gateways in
the IP Settings tab and click OK.
Do one or more of the following if you want to
configure additional IP addresses:
-In the IP Settings tab, in IP addresses, click
Add.
-In TCP/IP Address, type an IP address in IP
address and a subnet mask in Subnet mask,
and then click Add.
-Repeat the above two steps for each IP
address you want to add.
-Configure additional default gateways in the IP
Settings tab by clicking Add in Default
gateways.
-In TCP/IP Gateway Address, type the IP
address of the default gateway in Gateway. To
manually configure a default metric (the
number of transmission hops), clear the
Automatic metric check box and type a metric
in Metric.
-Click Add.
-Repeat the previous three steps for each default gateway you want to add.
-Click OK when finished.
Setting Up Your Computer's IP Address
ZyAIR B-500 Wireless Access Point User's Guide
C-7
Advertisement
Table of Contents
