ZyXEL Communications ZyAIR G-500 User Manual page 73

Table 6-5 Wireless LAN: 802.1x/WPA for 802.1x Protocol
LABEL
ReAuthentication
Timer
(In Seconds)
Idle Timeout
(In Seconds)
Key Management
Protocol
Dynamic WEP
Key Exchange
Wireless Security
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. This field is activated only when you select Authentication
Required in the Wireless Port Control field.
Enter a time interval between 10 and 9999 seconds. The default time interval is 1800
seconds (30 minutes).
If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
The ZyAIR automatically disconnects a wireless station from the wired network after
a period of inactivity. The wireless station needs to enter the username and password
again before access to the wired network is allowed.
This field is activated only when you select Authentication Required in the Wireless
Port Control field. The default time interval is 3600 seconds (or 1 hour).
Choose 802.1x from the drop-down list.
This field is activated only when you select Authentication Required in the Wireless
Port Control field. Also set the Authentication Databases field to RADIUS Only.
Local user database may not be used.
Select Disable to allow wireless stations to communicate with the access points
without using dynamic WEP key exchange.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Up to 32 stations can access the ZyAIR when you configure dynamic WEP key
exchange.
This field is not available when you set Key Management Protocol to WPA or WPA-
PSK.
ZyAIR G-500 Wireless Access Point User's Guide
DESCRIPTION
priority.
6-17