Console Port Speed; Log And Trace; Viewing Error Log; Figure 85 Menu 24.2.2 System Maintenance : Change Console Port Speed - ZyXEL Communications ZyAIR G-3000 User Manual

ZyAIR G-3000 User's Guide
Table 49 Menu 24.2.1 System Maintenance : Information
FIELD
LAN
Ethernet Address
IP Address
IP Mask
DHCP
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.

17.2.2 Console Port Speed

You can set up different port speeds for the console port through Menu 24.2.2 – System
Maintenance – Console Port Speed. Your ZyAIR supports 9600 (default), 19200, 38400,
57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select
the desired speed in menu 24.2.2, as shown in the following figure.

Figure 85 Menu 24.2.2 System Maintenance : Change Console Port Speed

Menu 24.2.2 – System Maintenance – Change Console Port Speed
After you changed the console port speed on your ZyAIR, you must also make the same
change to the console port speed parameter of your communication software.

17.3 Log and Trace

Your ZyAIR provides the error logs and trace records that are stored locally.

17.3.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error log. Follow
the procedures to view the local error/trace log:
1 Type 24 in the main menu to display Menu 24 – System Maintenance.
2 From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.
149
DESCRIPTION
Refers to the Ethernet MAC (Media Access Control) of your ZyAIR.
This is the IP address of the ZyAIR in dotted decimal notation.
This shows the subnet mask of the ZyAIR.
This field shows the DHCP setting of the ZyAIR.
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
Chapter 17 System Information and Diagnosis